VIC, Melbourne or Postage. RanJs Rhino rack and Prorack spare parts clean out.

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

Ok.... so here's the deal... i have literally hundreds of bits and pieces from both Rhino, Rola and Pro rack. Here's the catch... nearly everything was purchased to repair/replace something that was broken, so nothing is a complete kit... well... not quite... when I've ordered the wrong component and couldn't be bothered sending it back.

I have no bars.
I have no pairs of legs... but i do have individual legs in just about every height!
weird stuff you'd never think of...

Do I have a parts list? Nope.
Do I remember everything off the top of my head? Nope.
How much? Dunno. This stuff owes me very little but it does owe me something.

So I figure a price between $5 - $15 should keep us both happy.

Postage will be via AusPost at a minimum of $10. My wife will be doing the postage and she is a very busy lady so she tells me... so all I can really do is grab your part and give her an address. She'll purchase a post it bag and postage on the spot.

I'm in SE Melbourne and work all over Melbourne. If somebody wants to meet up with me and have a rummage through the boxes... not a problem! I can fit them in the car.

So, ask away for what parts you need and I'll see what I've got. Pretty good chance I do! Although if you're chasing spare channel nuts... sorry!

I have some photos and will see what I can post.

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

[Guest Close Guest]

Can I get the 2 rollers please?
And what are the lengths of the bars?

[fido666 Banned Find all posts View Profile Close fido666]

Only 1 S604? Interested if you have more than 1 as I still have a set of Vortex bars. I take it neither the S604 or the REB fit a Pioneer Platform?

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

Amts. Yep, no problem.. the bars are 800mm in between the end caps.

Fido... at some point tomorrow I'll pull out the boxes and see how many i can find. I'll let you know what I find. As for fitment to pioneer platform... couldn't tell you!

[fido666 Banned Find all posts View Profile Close fido666]

No worries RanJ, let me know what you find.

[Guest Close Guest]

I'll need to check if 800mm is enough.

How many RRGs have you got? Looking for 2.

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

Will do Fido. Also, is Bayswater a bit too far for you to do a pick up from?

amts, no sweat, if it's of any use I've also got an old rola demo carrier that's about 800 square if it's of any use.

I'll count up the rrgs. I think you're in luck.

Looks like tomorrow I'll have to make the inventory list I really couldn't be bothered doing. Lol.

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

Got some more photos, so pretty much disregard the stuff up top.

If anybody wants better photos for anything, just say so. All good.

470mm Roller that will fit both Rola Racks and Rhino Racks. http://www.rola.com.au/accessories-a.../ladder-roller It's the RCLRA-05 $70 value... $20?


Here is a bunch of photos showing the various legs. Majority of these are all single legs, so really only good for replacing a broken one... but thats how I got most of these! From fixing everyone elses!





This was a demo tray and is about 80cm square. I did actually use it and found it quite handy when I had my 3/4 bar setup on top. I had kayak on one side, cargo pod on the other side up front and then this fella carried all the jerry cans. It would also work well to use the corner pieces to repair or make your carrier. $30

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

The final photos...

Collapsible cargo roof top carrier. Handy little thing to have actually! Wouldn't use it on a regular basis but for the occasional use it does it's job! $20



Complete Prorack roof rack kit. 1000mm bars. Light duty. non gutter mount. $40 more photos available on request.


Easy Fit Canvas roof racks... Like a Claytons roof rack. The roof rack you have when you don't have a roof rack! I have two pairs of the MAXX LOAD model. http://www.6thgear.com.au/Downloads/...20Pamphlet.pdf $10 per pair



Dunno what this is... if you do... you want it? It cut my finger open on the demo bar underneath... so I figure it owes me a good solid $5er


Shovel holder and bracket $10

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

[Ribman Junior Member Find all posts View Profile Close Ribman]

Alladin's cave!

I'll take the collapsible cargo box, thank you very much.

Ribman

[QUOTE=RanJ;511983]The final photos...

Collapsible cargo roof top carrier. Handy little thing to have actually! Wouldn't use it on a regular basis but for the occasional use it does it's job! $20

[Ribman Junior Member Find all posts View Profile Close Ribman]

Plus I'll take both pairs of the clayton's racks
Easy Fit Canvas roof racks... Like a Claytons roof rack. The roof rack you have when you don't have a roof rack! I have two pairs of the MAXX LOAD model. http://www.6thgear.com.au/Downloads/...20Pamphlet.pdf $10 per pair

[macaroon1 Advanced Member Find all posts View Profile Close macaroon1]

Hi Ranj

I'll take the x2 RCEB and the single Rola Eye bolt in the pic (listed as $14.99).I'll send a PM with address??

If you still have the 80cm tray after many months I may be interested but....maybe not!!!
Many thanks.

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

Plus I'll take both pairs of the clayton's racks
Easy Fit Canvas roof racks... Like a Claytons roof rack. The roof rack you have when you don't have a roof rack! I have two pairs of the MAXX LOAD model. http://www.6thgear.com.au/Downloads/...20Pamphlet.pdf $10 per pair

Not a problem. Pm me your address, I'll package them up so I can calculate shipping costs and you can make a final decision from there.

Hi Ranj

I'll take the x2 RCEB and the single Rola Eye bolt in the pic (listed as $14.99).I'll send a PM with address??

If you still have the 80cm tray after many months I may be interested but....maybe not!!!
Many thanks.

Unfortunately I've already promised the rcebs elsewhere. Would you still like the eye bolt? I figure shipping for the single item could still be between $5-10. So could be pretty close to the cost of one from a store with a reciept and full warranty. Either way... let me know, it's all good!