150 Prado bits and pieces

[AussieAndy Find all posts View Profile Close AussieAndy]

Hi everyone, having a bit of a clean out of the garage and shed and Mrs Andy has said all this clutter must go. I've got heaps of bits that I have pulled off the Prado that will never go back on so what's the point of keeping it. Hopefully one of you guys have a use for it. I don't really have much of an idea what any of this stuff is worth, so my prices are only approx, let me know if anything is way too expensive.

Front upper control arms

Fitted to the vehicle for 8,000Km all on road and in as new condition
I think the pair would be worth $150

Full Suspension (front and rear springs and shocks)

Same as the control arms, 8,000Km on road and as close to new as possible
Sold

Spare wheel cover including backing plate in silver

Removed from vehicle the day after we picked it up, so once again in as new condition
Sold

Weird looking red light/reflector things in the rear bumper

Came out when the Kaymar was installed, in perfect condition. Have left, right SOLD
$15ea

Genuine Toyota towbar wiring loom

Bought to install with the Kaymar, but Kaymar supply one almost exactly the same. So brand new and complete
$110

Also have a few things I don't have pics of, but everyone knows what they look like.

Factory bash plates, came off vehicle with about 2,000Km on it. Never used off road, perfect condition. Sold

Fog lights, include surrounds, globes and even the lower half of the front bumper if wanted. In perfect condition again, I may have to clean a bug off one. $20ea?

Factory roof rails. No broken clips, plastics great. All bolts and mounts etc. included. $150?

All these parts were fitted to my 2014 150 GXL Manual in Silver. If pics are required for the other bits I can take some, just didn't think they were really needed. There may be some other bits and pieces that I can add later. If there is something I may have that you need just shoot me a PM, you never know your luck.

Cheers,
Andy

[DGW Senior Member Find all posts View Profile Close DGW]

Hi Andy,

PM sent about the "Weird looking red light/reflector things in the rear bumper"

[lukiss99 Lurker Find all posts View Profile Close lukiss99]

Keen on suspension and rear wheel cover, sent PM

[Nova Member Find all posts View Profile Close Nova]

I am after the wiring loom for the front fog lights if you are willing to separate from the lights? Just the part with the grey plug that goes from the car to the lights. Want to get my bullbar fog lights working with the factory switch.

Cheers, Nova

[fido666 Banned Find all posts View Profile Close fido666]

Factory bash plates, came off vehicle with about 2,000Km on it. Never used off road, perfect condition. $100?

Which model variant did these come off?

ETA: Never mind, I see it was a GXL so no KDSS.

[AussieAndy Find all posts View Profile Close AussieAndy]

I am after the wiring loom for the front fog lights if you are willing to separate from the lights? Just the part with the grey plug that goes from the car to the lights. Want to get my bullbar fog lights working with the factory switch.

Cheers, Nova

No loom left, the TJM bullbar reuses that loom unfortunately. Sorry mate.

[Nova Member Find all posts View Profile Close Nova]

Damn, my tjm bar is setup with a relay for the fogs, was hoping to return them to stock switch. I'll keep looking, thanks though.

Cheers, Nova

[diesel69 Junior Member Find all posts View Profile Close diesel69]

Damn, my tjm bar is setup with a relay for the fogs, was hoping to return them to stock switch. I'll keep looking, thanks though.

Cheers, Nova

Have they fitted a separate switch as well?
Mine was like that and he factory connectors were just cable tied back on themselves. Fifteen minutes and a bit of swearing had the factory switch and wiring working the fog lights in the TJM bar and I later used the TJM supplied switch and wiring for my driving lights after moving the pick up wire from the park lights to the high beam feed.

Pete

[Nova Member Find all posts View Profile Close Nova]

Wiring is there, they just unplugged the factory fogs and binned them. I don't want to cut up the loom so I'm after the grey plugs to make my own to connect the tjm fogs to the Toyota plugs.

[diesel69 Junior Member Find all posts View Profile Close diesel69]

So are you saying the TJM supplied fog lights use a different connector than the factory lights?

If so they must have changed something because mine are the same

[AussieAndy Find all posts View Profile Close AussieAndy]

Ok guys, not that I don't appreciate the bumps, but come on, it is a for sale thread. Nova, if you need a hand to get your fogs sorted either start a thread or send me a PM and I can help you out from there. Cheers gents/ladies