Tweet
ITEM: 120 Series Prado Storage Drawers
CONDITION: used. good.
REASON FOR SELLING: no longer required
PRICE AND PRICE CONDITIONS: bidding starts at $600 pickup from WA Perth Metro Northern Suburbs
EXTRA INFO:
Storage Draws Custom-Made for Toyota Prado 120 Series
* I made these draws with ease of installation in mind. No drilling or screwing is required for installation - the drawers simply utilize the original fixing points that the back seats 'click' into. The side locking mechanism of the drawer attaches to the rear seat fixing point (pic4&5 shown without the fixing point Prado 'molded cover') and the bottom of the drawer is secured using tie down strap attached to the floor locking point of the rear seat (pic6&7).
* Additionally one drawer can be installed alongside one rear seat - you do not have to use both the drawers together at the same time. You can use the left drawer next to the right rear row seat, or the right drawer next to the left rear row seat (pic3).
* Drawers are constructed using 17mm external grade ply for the carcass and face panel of the drawer, and 12/13mm external grade ply for the drawer itself
* Drawer locks are stainless steel 'T-locks'
* Drawers are mounted on ball-bearing roller runners.
* When drawers are fully extended they have a stopping point so will not 'fall out'. To remove the drawer if required, there are two release points on either side of the runner.
* Each drawer has a galvanised steel tie down point in the top of the carcass which are bolted to the carcass with stainless steel bolts and 't-nuts'. These tie down points can be used for securing additional cargo, car-fridge etc
* The carpeted 'cover panel' (as seen in pic3 running right to the edge of the interior of the Prado) is removeable (pic5) allowing you to maximise your storage space.
* Drawers are finished with carpeting to match the interior carpeting of our Prado (see pics for colour).
LOCATION: WA Perth Metro Northern Suburbs
PICTURES:
PIC1
PIC2
PIC3
PIC4
PIC5
PIC6
PIC7
Cheers for looking.
CONDITION: used. good.
REASON FOR SELLING: no longer required
PRICE AND PRICE CONDITIONS: bidding starts at $600 pickup from WA Perth Metro Northern Suburbs
EXTRA INFO:
Storage Draws Custom-Made for Toyota Prado 120 Series
* I made these draws with ease of installation in mind. No drilling or screwing is required for installation - the drawers simply utilize the original fixing points that the back seats 'click' into. The side locking mechanism of the drawer attaches to the rear seat fixing point (pic4&5 shown without the fixing point Prado 'molded cover') and the bottom of the drawer is secured using tie down strap attached to the floor locking point of the rear seat (pic6&7).
* Additionally one drawer can be installed alongside one rear seat - you do not have to use both the drawers together at the same time. You can use the left drawer next to the right rear row seat, or the right drawer next to the left rear row seat (pic3).
* Drawers are constructed using 17mm external grade ply for the carcass and face panel of the drawer, and 12/13mm external grade ply for the drawer itself
* Drawer locks are stainless steel 'T-locks'
* Drawers are mounted on ball-bearing roller runners.
* When drawers are fully extended they have a stopping point so will not 'fall out'. To remove the drawer if required, there are two release points on either side of the runner.
* Each drawer has a galvanised steel tie down point in the top of the carcass which are bolted to the carcass with stainless steel bolts and 't-nuts'. These tie down points can be used for securing additional cargo, car-fridge etc
* The carpeted 'cover panel' (as seen in pic3 running right to the edge of the interior of the Prado) is removeable (pic5) allowing you to maximise your storage space.
* Drawers are finished with carpeting to match the interior carpeting of our Prado (see pics for colour).
LOCATION: WA Perth Metro Northern Suburbs
PICTURES:
PIC1
PIC2
PIC3
PIC4
PIC5
PIC6
PIC7
Cheers for looking.
Comment