*** Solved... It was a bad MAF (IAT) ***
It's been a while and tried a few things and now seems like we might have success, So posting up...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
48 results in 0.0265 seconds.
Keywords
Members
Tags
-
I had something similar to this a few years back. Temp would spike, specially if speed was over 80kph. Turned out the viscus fan coupling had low viscus...
Leave a comment:
-
Retardation and rough acceleration
Well the old rig has held up well for years now, but just lately I can't figure out whats up with it.
New spark plugs 40K ago.
Starts...
-
Im still loitering here. Prado mods have eased up a bit as have the trips in the last 2 years due to having to finance a house. But the small trips...
Leave a comment:
-
Forgot to mention I also use a 5watt 50ohm resistor. Was using 1watters but they kept getting too hot and became unreliable. It might have been the Simpson...
Leave a comment:
-
Yes those instructions are what the gas installer should have followed when they pulled the sub tank out.
Have a look at what they did and see...
Leave a comment:
-
Hi GXL05,
This is what I did to get my Fuel gauge to work correctly after my LPG conversion. Chances are that doing this will fix your gauge...
Leave a comment:
-
Re: Cracks in Inner Guards
I was lucky enough to have a good mate who could take care of this.
The crack was fixed by using TIG welding,...
Leave a comment:
-
Re: Need help from 6spd owners
Thanks for the help guys,
Im in the process of organizing the removal of Gearbox and Transfer case....
Leave a comment:
-
Re: Cracks in Inner Guards
I have only just discovered my inner guards were cracking on the passenger side. They had developed a vertical...
Leave a comment:
-
Re: Need help from 6spd owners
Its a late 2004. It has to 2005 interior and I'm told is essentially a 2005 model. Unsure...
Leave a comment:
-
Re: Need help from 6spd owners
Anyone able to run a stationary test for me and describe if there is any obvious drive noise out of a normal...
Leave a comment:
-
Need help from 6spd owners
I need some help from those who own a 6 speed box.
I suspect that I have a worn output shaft bearing or bearings. (I believe there is 2 in there....
-
Re: LPG Conversions
Just a quick update for all those LPG conversions suffering from Fuel Gauge issues.
I have had problems getting...
Leave a comment:
-
Re: Rear end clunk/bang (Spring Spacers)
Another thing to check..
I had a random clunk in the back somewhere seemingly connected...
Leave a comment:
Leave a comment: