Announcement
Collapse
No announcement yet.
Search Result
Collapse
30 results in 0.0088 seconds.
Keywords
Members
Tags
-
Tried the temp wires and same issue!! I'm going mechanical and after some research most common mechanical pumps are the 4m40 mitsubishi and the 2L-II...
-
By the way I'm doing temp wires for all sensors from the ECU and see how it will function. I have an extra wiring loom from a auto engine so I cut the...
Leave a comment:
-
I replaced the crank sensor, but still the same issue. My other concern is according to my knowledge there's a rev limiter when the RPM hits near the...
Leave a comment:
-
Ok another very weird symptoms is when I disconnect the crank sensor the engine doesn't die?! Any suggestions?
Leave a comment:
-
All earth connections checked! This car is driving me crazy and I'm sure it's going to be such a stupid small reason for all this
Leave a comment:
-
Yes this is what I did direct power to the red/black wire and temp wire from ECU to green/white
Leave a comment:
-
I have Red/Black and Green/White to the TCV. Below are the several trials I did and the conclusion.
1)Temp wire from ECU directly to TCV...
Leave a comment:
-
-
That's a new piece of info for me didn't know there were series 1 and 2 prado. Mine is a 1998 European specs as it used to belong to someone in the Italian...
Leave a comment:
-
No it's not a electronic throttle I have a cable. I thought the electronic throttle was just for the common rail diesels.
Leave a comment:
-
Yes on the other side of the world
Downloaded the wiring diagram. I have very limited knowledge about car electrical wiring. I thought...
Leave a comment:
-
Perfect I have a friend in Perth who travels frequently to Egypt and won't mind bringing it with him. Will let you know. Old diesel rattle is exac5lying...
Leave a comment:
-
Ok great thanks backup plan. Where are you located ?
Had some oil around but can't recall any hard wires .
Leave a comment:
-
Yes it's a manual and I bought a new ECU and didn't make any difference when I plugged it in.
I'm very suspicious about the engine wiring loom...
Leave a comment:
-
It does it most of the time, but even if the light didn't come on it'll go on once I hit around 100 KM/H. I can't find the a pattern for it. You mean...
Leave a comment:
Leave a comment: