Cheers Ken
Used Mapp gas tourch to heat the rod when bending it, so hopefully no stress cracks! Did not consider any vibration protection!...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
25 results in 0.0057 seconds.
Keywords
Members
Tags
-
I inherited a remote AT cooler install on my latest truck, but was not happy with how it had been installed! So I re-installed it myself
...
Leave a comment:
-
I have an iPad3 64g 3/4G running Memory Map and its been faultless to date. I went with the 3/4G version as it has an in built real GPS chip set that...
Leave a comment:
-
Here is some measurements to ponder.
All of the following measurements have been made from the underside of the plastic arch body molding...
Leave a comment:
-
I did stumble over this info on IH8MUD
There's alot more on the subject here http://forum.ih8mud.com/80-series-tech/477...
Leave a comment:
-
Happy to do so and when I'm away in Wales next I shall en-devour to find the perfect axle twister for the measurement
Fitting the 80 series...
Leave a comment:
-
Yes I bought one on Saturday and it's coming in the post with my new 15mm strut top spacers I managed to find a chap selling 25mm spacers who could...Last edited by sae70; 25-03-2013, 10:05 PM.
Leave a comment:
-
I did fully load her up as if away for a weekends camping and trailing trip with a full tank of fuel and all my camping gear and a 20Kg weight representing...
Leave a comment:
-
I've not fitted any spacers as yet, so the front is still lower than the rear in all cases including the scenario with the proposed 15mm strut top spacer...
Leave a comment:
-
The other bit of information that I'm looking for are the dimensions of the strut top mounting plate, the PCD of the 3 fixing studs would be great. Not...
Leave a comment:
-
I'm sure that while extensively researching the 80 series spring upgrade last week that I'd stumbled over someone that had fitted 15mm front strut top...
Leave a comment:
-
Just fitted 80 series front springs in the rear, photos
I've just fitted a brand new set of KYB standard 80 series springs in the rear of my 3.0TD SWB Manual Colorado/Prado and I'm over the moon with the lift...
-
-
-
I'm running the 255/85/16 BFG KM2's on my truck with Nowt more than an Ironman Suspension lift, standard rims, no spacers, no trimming or bashing with...
Leave a comment:
Leave a comment: