Hi all.
The 4 Spd MATCU has been born out of the TCC locker thread. It's more than a TCC locker hence the new thread.
The MATCU...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
22 results in 0.0095 seconds.
Keywords
Members
Tags
-
Thanks for that Jamie. Terrific! It sounds like you will clock up that next 300k km pretty quickly the way you are going. As such you will be the test...
-
Thanks for that info Rusty. It's good to know. I think we might be safe from that one then. The old 4Spd is very soft at holding the TCC lock ON. They...
Leave a comment:
-
Hi all.
The 4 Spd MATCU mentioned previously is in and running fine. No ECU codes triggered to date, even with configuration splits like...Last edited by BigFoot120; 26-03-2015, 08:56 PM.
Leave a comment:
-
Hi all
I was talking to a Ford mechanic yesterday. He tells me there is another risk associated with the use of TCC lockers, apart from the...
Leave a comment:
-
"So far all the wiring diagrams from suppliers have been wrong or not for my VX 120 series"
Are you using the original Toyota wiring...
Leave a comment:
-
You guys are making me jealous with all this gallivanting around. I'm still grounded for another 6 months yet.
I've just finished bench testing...
Leave a comment:
-
Got all my bits for the MATCU from O/S now so no excuses. I've posted a few more pics of the paddle switches, wireless receiver and the PCB layout....
Leave a comment:
-
Mine won't be expensive, however there will be a lot of time involved in developing the software but I have that at the moment. I'm somewhat grounded...
Leave a comment:
-
Ha ha, Thanks Mule. I'll start a new thread when it's all finished. This is as good a place as any for the interim.
I have a few bits on order from...
Leave a comment:
-
The MATCU (Manual Auto Transmission Control Unit)
Hi all
With everyone complaining about TCCs not locking when desired and...
Leave a comment:
-
Smally: Yes your right. The signal on B22 should be positive with respect to ground. If you put a 10 ohm resistor in series, the most positive end will...
Leave a comment:
-
A KZJ120. I believe that makes it a 1KZ-TE with a 4spd 340F A/T. Similar to mine but with a 3L diesel.
It's not a stand alone trans ECU. It's all...
Leave a comment:
-
Thanks Jamie. I would hate to count the number of years I have been in this game. I still get a kick out of designing weird things, even though it was...
Leave a comment:
-
Smally. Your right! I was thinking "old world" with my thoughts on shift points. Yes the ECU is where the shift points are determined. It wouldn't...
Leave a comment:
Leave a comment: