Hi fellow PPers,
someone wrote about this some time ago but can't find the post. We have a1KZTE thatnhas done 340,000 km and still going...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
89 results in 0.0123 seconds.
Keywords
Members
Tags
-
Low speed drone
-
Modb for 1 KZTE for iPhone
has anyone seen the above. I had an android phone and bought an odd adaptor but it never worked.
Cheers,
owen. VK6YBA
-
Removing rear door inside liner
the internal rear door handle does not work. Outside is fine. Have checked child proof lock is in correct position so need to remove the interior ...
-
Hi lee. My bad. I have 1KZTE so no worries about injectors. For some reason I thought all the posts
regarding engines blowing were 2.8's. How wrong...
-
3 litre D4D engine
Is the 3 litre D4D engine plaqued with same injector issues as the 2.8 engine?
-
hi all,
I have a home fitted trans cooler and have tried to connect my android phone [Huawai] to blue tooth dongle I can keep an eye on things...
Leave a comment:
-
Just a bog standard 1KZTE. will not remain in lock if cruise is used. will stay in lock out of cruise with no issue. locks at about 80kph.
...
Leave a comment:
-
hi 404mpg.
Being a non d4d I think this has a 3 speed auto with torque converter lock or as some refer to it, overdrive.
I am...
Leave a comment:
-
1KZTE wont hold lok up cruise on
Hi mall,
Just been on a relatively short trip to Bridgetown from perth. Even on flat it wont hold lock in whatever the highest gear is...
-
hi again. found slow leak. and where was it/ right in the center of the tread. put a plug in it anyway. it will do as a third spare. I think our Jayco...
Leave a comment:
-
Sensitivity to front tyre pressure difference
Hi peeps,
slow leak in left front, goes down 5-6 psi in 3-4 weeks/ I know when it needs blowing up as it starts pulling left. no\\Not a...
-
Hi Joebloggs.
As afar as cable is concerned make sure the description on the reel says something like 6mm squared or 6mm to power of 2....
Leave a comment:
-
Idle up for 1KZTE
Has anyone done this. If so how. I can imagine a solenoid pushing or pulling somewhere bur being fly by wire??
Cheers,
...
-
I took the old girl outside to flat area and where I see the stick better and found the appropriate marks and all is well. Thanks.
Owen ...
Leave a comment:
-
how to check auto fluid level in 1kzte
I know where the auto fluid dipstick is but can't find info in owners manual re interpreting marks on stick. I believe it is done hot.
...
Leave a comment: