Announcement
Collapse
No announcement yet.
Search Result
Collapse
18 results in 0.0075 seconds.
Keywords
Members
Tags
-
Are u sure its the pump? All the info i can find says 1gr definitely dont prime
-
Extended cranking time
Hey guys
Ive noticed it seems to be a common issue on 1grfe motors.
Motor turns over fast but takes 6 cranks to finally...
-
So v6 owners can confirm their crossover pipe is lower then the gearbox crossmember and is ovaled?
Leave a comment:
-
Was from a private contact. They have all the genuine marks om them so not sure if he got them from the original manufacturer or not . Original injectors...
Leave a comment:
-
Sorry i meant put a spacer under the gearbox mount (between the crossmember and the mount)
Leave a comment:
-
Thanks for the reply. I was thinking of spacing my gearbox crossmember up to lift the exhaust up a bit. It keeps hitting on stuff and has dints in it...
Leave a comment:
-
I imported my own from overseas . Cost me about $200 for all 6!
Leave a comment:
-
Exhaust under gearbox problems?
Does anyone with the 4.0l v6 have issues with the exhaust cross over pipe hitting on stuff when offroad or is it only me?
Mine hangs a...
-
I did my 4.0l injectors last week after having a misfire in overdrive.
Drivers side took me at most 30mins from start to finish. Passenger...
Leave a comment:
-
Mine was more of a misfire. Would only do it when the auto changed into overdrive (mine goes into overdrive at around 65kmph) then i put my foot down...Last edited by hammertime; 08-08-2017, 06:06 PM.
Leave a comment:
-
Amayama are saying $226usd for one injector . Mine were $200 for all 6.
Before you spend more money explain your symptoms to me and what you have...
Leave a comment:
-
Mark i think you are wasting your time with serviced injectors in my opinion. I bought genuine injectors from an over seas manufacturer for $200 for all...
Leave a comment:
-
SOLVED
For anyone reading this in the future with the same problem. I changed all 6 injectors (2 hour job) and the problem is gone. Smooth...
Leave a comment:
-
UPDATE NUMBER 2056
tranny mount changed - no improvement
One positive I found is that it is 100% worse when cold for me. ( its...
Leave a comment:
-
Going off this thread and the people before us its either going to be lock up converter giving a little slip when it engages. Or injectors. Both seem...Last edited by hammertime; 05-07-2017, 09:48 AM.
Leave a comment:
Leave a comment: