Originally posted by myminirocks
View Post
The easiest thing for you to do is get a square sheet of cardboard that will fit flat on the floor. Push this hard against the back of the second row seats and as far left as you can get it and hold it in place. Now get a short length of wood to act as a spacer (anything will do, I only say wood as you are likely to have an off-cut lying around) and a marker pen. Place the wood against the side of the rear space and mark the cardboard - do this all down the side and your cardboard will have the same shape as the side. Cut along the line you have just marked and this will be your template. Now repeat the process for the right side (the two sides are different). Get the wood sheet and transfer the templates onto this. you will have to take a measurement across the whole width of the rear compartment to ensure you get the templates in the correct place on your wood sheet. Now cut the sheet and it should drop neatly into place.
Comment