Removing some ORS Draws stuck on the sliders

[azprado Junior Member Find all posts View Profile Close azprado]

Hi Guys,

Hoping someone can help, I've had a set of the ORS draws in my 120 series for a couple of years now and I need to remove them I've removed the wings etc but can't work out how to remove the drawers from there sliders, normally from what I have seen the full extension sliders have a tab that you lift and then the draws can be removed but I can't for hte life of me find them.

Having the instructions would probably be helpful but as with most things I have put them in a safe place.

I've attached a couple of photos hopefully someone has an idea?

[Philphy Lurker Find all posts View Profile Close Philphy]

They look the same as the sliders as a mates camper had and only way we could get them out was to take the rivits out of the draw or box. Was a pain in the arse as they kept clogging up with dirt and needed cleaning all the time.

[ondaboat Coopers Pale Ale Find all posts View Profile Close ondaboat]

I dont know but the black widow draws have 2 tabs inside the draw at the back that you have to pull in to release the draw. Having said that they don't use runners like that so may be useless info

Regards Adam

[Guest Close Guest]

Is the 3rd photo of the drawers fully extended? If so, then it doesn't look like there is a latch or button there to release it.

[azprado Junior Member Find all posts View Profile Close azprado]

Is the 3rd photo of the drawers fully extended? If so, then it doesn't look like there is a latch or button there to release it.

Yep third photo is fully extended, I've emailed the guys at ORS to see if I can get another copy of the instructions really didnt think it would be this hard :S Oh well shit happens eh end of the day they went in so they must come out again somehow

[azprado Junior Member Find all posts View Profile Close azprado]

Went and had another look tonight think I finally worked it out, when I removed the carpet from inside the draws I found what looks like a metal tab/slot style of system for the mounting of the sliders, looks like it might need the application of a hammer shaped persuader or the like to get things loosened up so something to tackle tomorrow if time permits.

[azprado Junior Member Find all posts View Profile Close azprado]

Well apart from from a slightly odd look from the neighbour when he saw me taking a hammer to the car I'm all good now, couple of persuasive knocks and we were good to go.

Draws are now fully out

[VKPrado Avid PP Poster! Find all posts View Profile Close VKPrado]

Good to hear the problem has been solved.