Chassis pins should already be fitted with the original brackets.
Announcement
Collapse
No announcement yet.
Sovereign bull bar fitting instructions
Collapse
X
-
Originally posted by amts View PostSee first post[B][2007 GXL 120 3.0L D4[COLOR="#FF0000"]D[/COLOR] Auto][/B] [I]Mods:[/I] [COLOR="#DAA520"]Bilstein [/COLOR][COLOR="#0000FF"]Shocks [/COLOR]& [COLOR="#DAA520"]King [/COLOR]2" Lift Springs - 265/70/17 [COLOR="#3366ff"]Cooper [/COLOR]AT/3s Tyres - [COLOR="#FF0000"]ARB [/COLOR]Deluxe bullbar - LED Spotlights & Worklights - Snorkel - [COLOR="#008000"]BushSkinz [/COLOR]bash plates - 2.2m Alloy Overlander Full Rack - 2.5m [COLOR="#8B4513"]Wanderer [/COLOR]Awning - [COLOR="#FF0000"]GME [/COLOR]TX3120S UHF & [COLOR="#FF0000"]GME [/COLOR]AE4703 6.6dBi - [COLOR="#FF8C00"]Milford [/COLOR]Cargo Barrier - [COLOR="#FF0000"]JVC [/COLOR]indash DVD - [COLOR="#FF8C00"]Maxtrax [/COLOR]- Pulling a heavily modified [COLOR="#3366ff"]Jayco [/COLOR]Dove Pop Top Camper
Comment
-
Hi guys, could someone please email me how to remove the front bumper also?
[email protected]
Thanks heaps!
Comment
-
Hi all,
I have been through the thread and tried all the links they don’t appear to be active any more.
I am fitting a winch to my 2003 Prado and need to fit the sovereign bar upgrade bracket kit and winch cradle kit.
Can someone please send me the removal and installation instructions so I don’t break something. Thank you.
Please email me at [email protected]
Comment
-
I am in the middle of fitting the bullbar and was wondering how those who went before me fitted the inner plastic guards. I am guessing that they get fed into the bull bar wings and then raise the bar up to mounting position. Is this correct? I am also assuming that there is no need to use screws as the guards are held captive in the bullbar wings. Any advice is appreciated.
Comment
-
I have the bullbar all mounted and tight now. I was wondering if there is something that fixes to the bottom of the bullbar that secures the inner plastic guard. I think it is what Toyota calls the "wing undercover" I have the inner guards secured in the gap on wings and it is just the bottom that seems to be hanging in mid air.
- 1 like
Comment
-
Hi all, just joined this fantastic forum. I have had a 03 Prado for 18 mths (had 59k on the clock when I got it) and I just love it as much as it loves petrol. I now have a Toyota over bumper bullbar to fit and need to get the OEM bumper off to fit the brackets, can someone please tell me how to do this, Toyota instructions say the job will take 30 mins...think its gonna be longer than that! Thanks in advance, cheers Leigh
Comment
-
Originally posted by thebaz View PostI have the bullbar all mounted and tight now. I was wondering if there is something that fixes to the bottom of the bullbar that secures the inner plastic guard. I think it is what Toyota calls the "wing undercover" I have the inner guards secured in the gap on wings and it is just the bottom that seems to be hanging in mid air.
there is also in following posts 25 and 28 a diagrams with dimensions for a bash plate to fit under bar to protect radiator.
Comment
-
Thanks Sparksy,
I see what you did there and it was pretty creative. I made up some brackets to secure the inner guards as they would rub on the wheels once I got over 80-90km. It has not been a problem since but at some stage I would like to fit the correct parts. i will keep an eye out for a Prado being parted out that has a damaged bar and grab the plates.
Comment
-
Originally posted by Mseg77 View PostHi Guys a few years on now, I’m chasing the fitting instructions also please.Silver '04 KZJ120~Manual~GXL~Dobinson/Kings lift~Custom valved Ironmans~Detroit Locker~Endless Air~X9 Superwinch~Madman EMS1~TJM Dual Battery~Rhino Roof Tray~120W solar panel~Foxwing awning~Bushskinz UVP~Long Ranger water tank~Bushman fridge~Steinbauer P-Box~Beaudesert 2 3/4"~Airtec Snorkel~TJM Sliders~Prico Boost Gauge~BFG-KO2s~TPMS~GME TX3420~Front and Rear Cameras~Ultimate Camper hanging off the back!
Comment
-
Hi Guys,
I'm hoping someone can help me with regard to attaching the inner front wheel guard to the bullbar.
Looking at the instructions, it is a bit unclear to me. Once the bar is fitted, do I attach the guard to this metal undercover piece that fits into the corner of the bullbar?
I've attached a few photos to help explain what I'm asking.
Thanks
Jon
3 Photos
Comment
Comment