Sovereign bull bar fitting instructions

[waltec Senior Member Find all posts View Profile Close waltec]

Re: Sovereign bull bar fitting instructions

Hi Nahor

Here's a pic of the chassis pin and where it goes in the chassis.



Matt

[nahor Lurker Find all posts View Profile Close nahor]

Re: Sovereign bull bar fitting instructions

thanks for the picture but can you tell me what they do and how they are conected to the bar

[sparksy Senior Member Find all posts View Profile Close sparksy]

Re: Sovereign bull bar fitting instructions

Hi Nahor
The pins are actually more like nuts that fit into each chassis rail about where the radiator sits. You actually have to move the radiator out of the way to fit them in. A large bolt then passes from the front of the bar, from behind the plastic covers that fit over the uprights, through the mounting bracket and into the chassis pins. They literally pull the bar onto the chassis. Its a 12mm by 130 mm HT bolt so it gives extra strength and takes some of the load off the mounting bolts.
Another thing to make sure is that you fitted the rear chassis mounts, these generally are lost along with the chassis pins when the bars are removed. They give more leverage support to hold up the bar. If you need a set of the instructions PM me with your email details and I can forward on a set.

Regards
Wayne

[pradosurfer Lurker Find all posts View Profile Close pradosurfer]

Re: Sovereign bull bar fitting instructions

could someone please be kind enough to send me fitting instructions for 120 series sovereign bullbar and any other handy tips pradosurfer will appreciate any help my email is [email protected] thanks

[pradosurfer Lurker Find all posts View Profile Close pradosurfer]

Re: Sovereign bull bar fitting instructions

Hi
Ive just got a secondhand sovereign bull bar for my 120 and was wondering is anyone has the instructions to fit it.
I understand the inner skirts have to be trimmed but is there anything more involved than that.
Thanks
Wayne

[chops Lurker Find all posts View Profile Close chops]

Re: Sovereign bull bar fitting instructions

Hi, I've got my hands on a second hand sovereign bar, and I have purchased a fitting kit from Toyota.
In the fitting kit instructions it makes reference to the fog light housing. I seem to be missing the fog light housing, does anyone know if these items can be bought seperate? I have spoken with Toyota and knowbody seems to know what I'm after. I've had a look at a mates prado and there is definitely some sort of black plastic housing which is holding the fog light in place and is screwed to the bar.
Could someone please help....
Cheers,
Chops.

[sparksy Senior Member Find all posts View Profile Close sparksy]

Re: Sovereign bull bar fitting instructions

Hi Chops
If you have the fitting instructions its item 7 on the parts list.

They are sold separately and when I bought the left hand one for mine two weeks ago they were $29 ea.

Just pulled wrapping out of bin and the part # from toyota is PZQ29-60165-HR ( Light surround RH ) for the right hand side and the left to be PZQ29-60165-HL.

Wayne

[hagar Lurker Find all posts View Profile Close hagar]

Re: Sovereign bull bar fitting instructions

Just a thought but wouldnt it be handy if some one with the instructions posted a link to them on this site. would think it was very helpful. i will be removing my bar in the near future so if some body wants one pm me for a deal

[Keith H Lurker Find all posts View Profile Close Keith H]

Re: Sovereign bull bar fitting instructions

Could someone send me the fitting instructions too please? I'm chasing down a rattle in the left guard and want to find out how to get the l/h guard liner off! I suspect something is hot attached.
Thanks

keith

[seadog Lurker Find all posts View Profile Close seadog]

Re: Sovereign bull bar fitting instructions

Hey guys, I'm also looking for fitting instructions, if someone could post a link it would be greatly appreciated.

[Chippy Addicted PP Member Find all posts View Profile Close Chippy]

Re: Sovereign bull bar fitting instructions

Send me a PM with your email address :wink:

Cheers
Chippy

[VKPrado Avid PP Poster! Find all posts View Profile Close VKPrado]

Re: Sovereign bull bar fitting instructions

Well thanks to Sparksy I now have a set of instructions and can say that the bar was fitted when the vehicle was purchased new and there are no chassis pins fitted at all :shock: . I bought the vehicle second hand from the same dealer it was bought from originally so not sure if it is worth while or not chasing up on these pins.
Do you really need to have the chassis pins fitted :?

[MOWYA Junior Member Find all posts View Profile Close MOWYA]

Re: Sovereign bull bar fitting instructions

can anyone help me with the Narva part number for the replacement Sovereign bar signal lights please!!!!

[MOWYA Junior Member Find all posts View Profile Close MOWYA]

Re: Sovereign bull bar fitting instructions

Part number for the complete assembly is 87280(Narva Number) and only for the lens is 87285,Thanks
(Replacement signal lights for Sovereign Bull Bar)

[MOWYA Junior Member Find all posts View Profile Close MOWYA]

Re: Sovereign bull bar fitting instructions

Guys! I have just replaced my ARB bar with a Sovereign Bar, everything is all good, except it had missing foglamps!So I have sourced one but what fittings do I need to mount this on my bar!! Any one out there can help me and any offers for the ARB bar.Thanks