Purchased my SGII from Ample Outdoors via ebay, $190 delivered. Installed yesterday and works a charm. Now just to suss out how it works!
Phil
Similarly, I finally placed my order today given that our new car SHOULD arrive BEFORE the end of this month... Now to just start finalising all the other accessories on my wish list. 8)
[B][SIZE=4]ntp
[/SIZE][/B][COLOR=#000040][B][SIZE=1]Love the Outback............. Love my Prado.[/SIZE][/B][/COLOR]
[I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/Picture23.png"]My Prado[/URL][/SIZE][/I], [I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/MyExtras.png"]My Extras[/URL][/SIZE][/I]
[B]4wdriving First Party[/B][COLOR=#0000ff] - [/COLOR][B][COLOR=#0000ff]dןǝɥ ɹoɟ ןןɐɔ 'sıɥʇ pɐǝɹ uɐɔ noʎ ɟı[/COLOR][/B]
Hi All,
I've recently purchased a scangauge and have connected it all up OK. Had a small problem though with the location of the cable. I routed the cable up from the OBDII port up through the dash by the steering column and mounted the display unit on the steering column as others have done. When I started the scangauge up it connected fine and started to display data as you'd expect but after say 30 seconds the display started to show gibberish, basically random digits over its screen. It would stop this after a few minutes, and then start again in a bit, as well as when I turned the engine off and then started it up again after the scangauge had gone to 'sleep'.
I then took the cable out from under the dash and now have it running up over the steering column with the excess cable curled up on the other side. The display, and the unit generally, has been running fine since - over the last couple of days, only trouble is it's not very neat and tidy! It seems as though there was some electrical interference coming from somewhere. Has anyone else had the same problem? What did you do about it?
Hi All,
I've recently purchased a scangauge and have connected it all up OK. Had a small problem though with the location of the cable. I routed the cable up from the OBDII port up through the dash by the steering column and mounted the display unit on the steering column as others have done. When I started the scangauge up it connected fine and started to display data as you'd expect but after say 30 seconds the display started to show gibberish, basically random digits over its screen. It would stop this after a few minutes, and then start again in a bit, as well as when I turned the engine off and then started it up again after the scangauge had gone to 'sleep'.
I then took the cable out from under the dash and now have it running up over the steering column with the excess cable curled up on the other side. The display, and the unit generally, has been running fine since - over the last couple of days, only trouble is it's not very neat and tidy! It seems as though there was some electrical interference coming from somewhere. Has anyone else had the same problem? What did you do about it?
Thanks for your help
I would be looking at trying another cat5 cable and seeing if that is where the problem is. You can pick them up at dick smith or tandy pretty cheap. I have mine mounted above the rear view mirror and it actually looks real nice up there:
Roll on the 2010 Pradopoint GTG
Pradopoint GTG website:
[url="http://www.pradopointgtg.com"]http://www.pradopointgtg.com[/url] (final website location on its own domain)
My Weather Station In Alice
[url="http://www.alicespringsweather.a60.us/"]http://www.alicespringsweather.a60.us/[/url]
My photo website:
[url="http://centralian.redbubble.com/"]http://centralian.redbubble.com/[/url]
No, I haven't experienced this at all. My cables run from the OB port up behind the dash and along the steering column with no worries at all.
Originally posted by mav
I have mine mounted above the rear view mirror and it actually looks real nice up there
Mav, how do you go with the unit moving around when pushing the buttons? Is it still stable enough? I guess another set-up option, but I still prefer mine just above the steering wheel below the dashboard. I reckon this location is best suited for quick and easy reading (along with the other guages).
[B][SIZE=4]ntp
[/SIZE][/B][COLOR=#000040][B][SIZE=1]Love the Outback............. Love my Prado.[/SIZE][/B][/COLOR]
[I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/Picture23.png"]My Prado[/URL][/SIZE][/I], [I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/MyExtras.png"]My Extras[/URL][/SIZE][/I]
[B]4wdriving First Party[/B][COLOR=#0000ff] - [/COLOR][B][COLOR=#0000ff]dןǝɥ ɹoɟ ןןɐɔ 'sıɥʇ pɐǝɹ uɐɔ noʎ ɟı[/COLOR][/B]
how do you go with the unit moving around when pushing the buttons? Is it still stable enough? I guess another set-up option, but I still prefer mine just above the steering wheel below the dashboard. I reckon this location is best suited for quick and easy reading (along with the other guages).
No problem with stability the mount is made for the scanguage and it has seen some pretty bad corrugations and still mounted nicely. I like it cause it is directed to me and at mey eye level basically. I use the speedo on it to set my cruise all the time and I like checking the litres/hr.
Roll on the 2010 Pradopoint GTG
Pradopoint GTG website:
[url="http://www.pradopointgtg.com"]http://www.pradopointgtg.com[/url] (final website location on its own domain)
My Weather Station In Alice
[url="http://www.alicespringsweather.a60.us/"]http://www.alicespringsweather.a60.us/[/url]
My photo website:
[url="http://centralian.redbubble.com/"]http://centralian.redbubble.com/[/url]
I too have a problem with my scangauge. It isn't even a 2 weeks old and the screen is blank. The backlight is on but nothing else. Prior to it going blank the screen was frozen on the "gauge" display. I have unplugged/plugged back in with no luck. Will probably take it back for exchange.
Prior to it playing up it was great for the trip to Qld and half way back when it went kaput.
Mine has developed an earthing problem on the backlighting cct such that it randomly flickers around the colours but mostly settles on green. Other than that it has been and still is accurate on readouts.
Roll on the 2010 Pradopoint GTG
Pradopoint GTG website:
[url="http://www.pradopointgtg.com"]http://www.pradopointgtg.com[/url] (final website location on its own domain)
My Weather Station In Alice
[url="http://www.alicespringsweather.a60.us/"]http://www.alicespringsweather.a60.us/[/url]
My photo website:
[url="http://centralian.redbubble.com/"]http://centralian.redbubble.com/[/url]
I would be looking at trying another cat5 cable and seeing if that is where the problem is. You can pick them up at dick smith or tandy pretty cheap. I have mine mounted above the rear view mirror and it actually looks real nice up there:
Thanks Mav. Went back to Wooders and they replaced the whole thing - the unit and the cable. All works perfectly now so don't really know if it was the cable or the unit.
I would be looking at trying another cat5 cable and seeing if that is where the problem is. You can pick them up at dick smith or tandy pretty cheap. I have mine mounted above the rear view mirror and it actually looks real nice up there:
Thanks Mav. Went back to Wooders and they replaced the whole thing - the unit and the cable. All works perfectly now so don't really know if it was the cable or the unit.
Sounds like some good service from Wooders.
[B][SIZE=4]ntp
[/SIZE][/B][COLOR=#000040][B][SIZE=1]Love the Outback............. Love my Prado.[/SIZE][/B][/COLOR]
[I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/Picture23.png"]My Prado[/URL][/SIZE][/I], [I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/MyExtras.png"]My Extras[/URL][/SIZE][/I]
[B]4wdriving First Party[/B][COLOR=#0000ff] - [/COLOR][B][COLOR=#0000ff]dןǝɥ ɹoɟ ןןɐɔ 'sıɥʇ pɐǝɹ uɐɔ noʎ ɟı[/COLOR][/B]
Looks Excellent, Just ordered mine from Dave.. Might be here tomorrow if not then Monday... Can't wait to try it out.
2009 GXL D4D Auto. Sorereighn Bull Bar, Bonnet and Headlight Protectors, Bug Screen, Weather Shields, Tint, Rubber Mats Throughout, Hard Spare Cover, Tow Bar.
1998 Landrover Discovery V8 as a spare.
Mine has developed an earthing problem on the backlighting cct such that it randomly flickers around the colours but mostly settles on green. Other than that it has been and still is accurate on readouts.
Same thing happened to mine - turned out it was the cable socket on the unit that was 'cracked' - was replaced by Wooders straight away!
June 2008 D4D 6sp Manual GXL. Toyota bull bar, Custom Leather, Piranha Duel Battery, Bridgestone D694s, IPF 900XS, ScanguageII, front radiator bash plate and Uniden UHF
Mine has developed an earthing problem on the backlighting cct such that it randomly flickers around the colours but mostly settles on green. Other than that it has been and still is accurate on readouts.
Same thing happened to mine - turned out it was the cable socket on the unit that was 'cracked' - was replaced by Wooders straight away!
No problems with our unit. Still going strong since installation in early October 2008.
[B][SIZE=4]ntp
[/SIZE][/B][COLOR=#000040][B][SIZE=1]Love the Outback............. Love my Prado.[/SIZE][/B][/COLOR]
[I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/Picture23.png"]My Prado[/URL][/SIZE][/I], [I][SIZE=1][URL="http://i520.photobucket.com/albums/w328/ntpryce/MyExtras.png"]My Extras[/URL][/SIZE][/I]
[B]4wdriving First Party[/B][COLOR=#0000ff] - [/COLOR][B][COLOR=#0000ff]dןǝɥ ɹoɟ ןןɐɔ 'sıɥʇ pɐǝɹ uɐɔ noʎ ɟı[/COLOR][/B]
Comment