Hi guys.
I'm thinking to get 2007 V6 and it has already installed lift kits with c59-302 at the front and c59-329 at the back.
Front lift shows 800mm, rear - 850mm.
Currently there are no any accessories and, to me, the vehicle runs ok, no body roll but it's pretty hard on uneven road. It feels like driving a sport car.
I usually drive my car around town with 10-20kg at the back and put around 80kg once a month when going camping.
No towing, no hardcore 4WD, mostly driving on gravel roads in National Parks and beach driving.
I'm planning to install alloy bullbar, so, reading this forum I'd say leaving c59-302 should be OK?
I'd like to have softer ride and to drop rear lift to 810-820mm.
Thinking to swap c59-329 with c59-327.
Can I achieve the above height?
Any chance it'll sag when loaded lower than 810-800mm?
My current 90 series has better ground clearance so looks like getting 120 lifted is a necessity..
Thank you.
I'm thinking to get 2007 V6 and it has already installed lift kits with c59-302 at the front and c59-329 at the back.
Front lift shows 800mm, rear - 850mm.
Currently there are no any accessories and, to me, the vehicle runs ok, no body roll but it's pretty hard on uneven road. It feels like driving a sport car.
I usually drive my car around town with 10-20kg at the back and put around 80kg once a month when going camping.
No towing, no hardcore 4WD, mostly driving on gravel roads in National Parks and beach driving.
I'm planning to install alloy bullbar, so, reading this forum I'd say leaving c59-302 should be OK?
I'd like to have softer ride and to drop rear lift to 810-820mm.
Thinking to swap c59-329 with c59-327.
Can I achieve the above height?
Any chance it'll sag when loaded lower than 810-800mm?
My current 90 series has better ground clearance so looks like getting 120 lifted is a necessity..
Thank you.
Comment