150 Bullbar pictures thread..

[John75 Lurker Find all posts View Profile Close John75]

Hi Jayden82, The bar looks really nice! I have a new Graphite GXL going in mid December for the same colour coded bar. I was under the understanding that the 220 xrays would not fit! needed to go 200. Glad to see that that is not the case, and they appear to fit fine!

[jayden82 Junior Member Find all posts View Profile Close jayden82]

Hi Jayden82, The bar looks really nice! I have a new Graphite GXL going in mid December for the same colour coded bar. I was under the understanding that the 220 xrays would not fit! needed to go 200. Glad to see that that is not the case, and they appear to fit fine!

Hi John, yeah I'm stoked with the bar. I reckon it suits the 150 lines and looks more modern than the others. Also I have a thick paint job and the colour match is perfect - so yeah all good. I did order the 200's because i liked the led light ring, but there was a mixup and I ended up with 220's. The 220's have an led row at the base of the light. In the end don't really mind, 220's shoot further and wider.
Cheers.

[fido666 Banned Find all posts View Profile Close fido666]

Here's a pic of a black TJM T13 Outback bar on my silver pearl 150 Kakadu. Mine's a bit different to all the others I have seen, note the black infill between bodywork and bar. I'm not sure why it is this way as it was like that when I bought it but I do have the headlight washer option intact, not sure if the original infill would have retained them or been lost with the cutting required to fit the bar.

[jayden82 Junior Member Find all posts View Profile Close jayden82]

Here's a pic of a black TJM T13 Outback bar on my silver pearl 150 Kakadu. Mine's a bit different to all the others I have seen, note the black infill between bodywork and bar. I'm not sure why it is this way as it was like that when I bought it but I do have the headlight washer option intact, not sure if the original infill would have retained them or been lost with the cutting required to fit the bar.

Hey fido, lookin good!
Cheers
PS I got my plastic infill from TJM. Thanks

[fido666 Banned Find all posts View Profile Close fido666]

PS I got my plastic infill from TJM. Thanks

Thanks for the compliment. Did TJM just forget to give it you the infill plate?

[mickmac_42 Senior Member Find all posts View Profile Close mickmac_42]

TJM recommend doing the bumper cut rather than using infill panels for two reasons. First, the bumper cut is a more solid setup. Second, there have been issues with the plastic used for the infills which has resulted in painting and deformation issues.

If your car was fitted with headlight washers, the only option is to go with the infill panels (i suppose you could also pay to get a bumper from a GX or GXL and cut that). A bumper cut actually runs across where the washers are mounted. The infills relocate the washers a little higher up.

Mike

[fido666 Banned Find all posts View Profile Close fido666]

The plastic infill I have seems to be quite thick and has a bit of texture in the plastic so I can see how painting it might be an issue.

[brentonsav Junior Member Find all posts View Profile Close brentonsav]

I'm going to copy this setup. I think it looks much better than black or colour coded white. I just have to conclude which silver. I suppose it would look best to try and colour match the rims, so as not to introduce another colour to the mix, within reason. Can anyone really help here? The photos kindly provided by bfranzen don't show a side on pic without shadows but it appears the colour he chose is a little bit more grey than the silver rims.

My phone call suggested this is a $2600 exercise. $2250 for bar, $220 to paint and $120 for new fog lights.

Some questions:
1. Are the fog/driving lights any good? Would be be better to source my own?
2. Will ARB fit LED lights I supply to their bar at fitment?
3. Are they negotiable on price? If so, I should buy other gear with it and try and cut a better deal?

I'm going to place my order next week, to ensure it's ready for my Prado delivery around end of Jan.

[bfranzen Junior Member Find all posts View Profile Close bfranzen]

I chose Silver Ash colour - a brighter silver than the wheel by a couple of shades and less grey. would be a closer match to the wheels with some more grey in it. despite this it will look good regardless. I think my colour combo is great particulalrly when covered in dust! cheers

I'm going to copy this setup. I think it looks much better than black or colour coded white. I just have to conclude which silver. I suppose it would look best to try and colour match the rims, so as not to introduce another colour to the mix, within reason. Can anyone really help here? The photos kindly provided by bfranzen don't show a side on pic without shadows but it appears the colour he chose is a little bit more grey than the silver rims.

My phone call suggested this is a $2600 exercise. $2250 for bar, $220 to paint and $120 for new fog lights.

Some questions:
1. Are the fog/driving lights any good? Would be be better to source my own?
2. Will ARB fit LED lights I supply to their bar at fitment?
3. Are they negotiable on price? If so, I should buy other gear with it and try and cut a better deal?

I'm going to place my order next week, to ensure it's ready for my Prado delivery around end of Jan.

[The Alberto Member Find all posts View Profile Close The Alberto]

TJM T3 Bar in Graphite

Here's one for all the Graphite owners. There really is not many pics around of the TJM T3 bar. This has Hella Rallye 4000s fitted as well.

[jayden82 Junior Member Find all posts View Profile Close jayden82]

hey alberto, sweet looking bar mate!
looks subtle and disguised.
i was very tempted to go T3 for those reasons.
did they bumper cut? i see you have black plastic ribbing/piping.
cya

[The Alberto Member Find all posts View Profile Close The Alberto]

hey alberto, sweet looking bar mate!
looks subtle and disguised.
i was very tempted to go T3 for those reasons.
did they bumper cut? i see you have black plastic ribbing/piping.
cya

Thanks mate, I am really happy with how it turned out. Hopefully these pics will help others with their decisions. When I was looking, apart from the promo pics of the silver one on the first page of this thread I could not find anything. Went close to ordering either the TJM T13 or the ARB Sahara for these reasons, however after seeing it in the real I am glad I didn't.

Yeah mate, definately a bumper cut I made sure that is what they were going to do before I ordered it. Heard too many bad things about the wing inserts.

[AK7 Senior Member Find all posts View Profile Close AK7]

Here's one for all the Graphite owners. There really is not many pics around of the TJM T3 bar. This has Hella Rallye 4000s fitted as well.

Looks colour coded, can you confirm? Did you consider black? I'd just decided on the ARB Sahara, and now I see that TJM have the T3... Damn choices... *&%#ing free market Pretty sure I'll go the T3 actually. Althought I like the look of the Sahara better, I'm not prepared to trust the local ARB mob with my car.

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

AK I was in the same boat and actually had the Sahara bar on the spec list. Then I saw Alberto's pics and it was all over. Next week I will post pics of a Blue Storm T3 with Britax X-ray 220s.

[AK7 Senior Member Find all posts View Profile Close AK7]

Actually having a closer look at both the Sahara and T3 pics again... That T3 looks much nicer than the Sahara. Will be a few weeks for me. Might see what TJM can come up with on a bundle with a snorkel.