Announcement

Collapse
No announcement yet.

ROOFRACKS - What are 150 owners using???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dejo
    replied
    Hi guys, also looking at the rhino pioneer for my Kakadu but 1.5m model. Anyone know if this can be fitted to rhino roof racks utilizing factory rails? I want to avoid removing the factory rails and really like the flat tray of the pioneer.

    Cheers,
    Dejo

    Leave a comment:


  • LostDingo2
    replied
    Looks good Adam...appreciate the pics. I think this will be the way I go but first I need to sell my old rack. No room left outside!

    Leave a comment:

  • adamr7
    Senior Member

  • adamr7
    replied
    Here is a couple of photos showing the Foxwing and Rhino Rack.
    Attached Files

    Leave a comment:


  • LostDingo2
    replied
    Originally posted by adamr7 View Post
    I have a Rhino Pioneer, it is just over 2 metres long, I have an oztent rv4, and it is a perfect fit. I have a Foxwing Awning mounted on the passenger side, and the Oztent tucks in neatly along side. 2 small ratchet straps to tie down, very quick and easy.
    Cool Adam....any pics of your rig?

    Leave a comment:

  • adamr7
    Senior Member

  • adamr7
    replied
    I have a Rhino Pioneer, it is just over 2 metres long, I have an oztent rv4, and it is a perfect fit. I have a Foxwing Awning mounted on the passenger side, and the Oztent tucks in neatly along side. 2 small ratchet straps to tie down, very quick and easy.

    Leave a comment:


  • LostDingo2
    replied
    what rack would you use to toss an Oztent on the roof? An opened ended Rhino Pioneer? I want something like a Rhino as to ease in taking on and off.

    The Rhino 1510 does not work for me very well on the 150

    Leave a comment:

  • rob_macca67
    Avid PP Poster!

  • rob_macca67
    replied
    Started a new thread on Rooftop Storage Bags. See the following link: Roof Top Storage Bags - What do People Use?


    Originally posted by LostDingo2 View Post
    I am interested in what bags people use as well Rob. Half widths, small bag, what goes inside etc.

    Leave a comment:


  • LostDingo2
    replied
    I am interested in what bags people use as well Rob. Half widths, small bag, what goes inside etc.

    Leave a comment:


  • LostDingo2
    replied
    I'll have to let him know then

    Originally posted by amts View Post
    MLC might be interested in the 1510 tray.

    Leave a comment:

  • rob_macca67
    Avid PP Poster!

  • rob_macca67
    replied
    Yep... Ended up just buying the Leg kit and re-used the HD bars that I had leftover from the 100's. Kinda think the extra llength suits to. the100's ones are 1375mm vs the 150's which I think are about 1270 or so.... It doesn't look out of place at all. Now all I''ve got to do is modify the old roofrack that I've got stored in the shed so I can just bolt it to the HD rack and all is good.

    Learnt something with the Rhino HD install...... Should have inquired if I could have just bought the feet sections that bolt to the roof instead of the full kit as the legs that came with the kits are exactly the same legs as I had with the 100's kit. Could have saved a bit of money..... will know for next time.

    I was also looking at the Rhino Mesh Basket (1810x1200 I think), if re-using my old roofrack doesn't work, I'll go with the basket but the basket weights 22kg, while my old rack only weighs 13kgs.

    On a side note: What's people's thoughts on Roof-top Storage Bags? What Size? What Brand/model, etc?


    Thoughts.... comments?
    (should I make another topic for this one?)


    cheers....
    rob
    Originally posted by LostDingo2 View Post
    I took my rails off and did just as you want to end up with Rob. Bought my Rhino kit straight from Rhino's showroom and no one ever mentioned a waterproof membrane? Anyway the RCP feet comes with the fittings which also has the foam washers for sealing etc.

    I have had no issues or seen any leaking and considering the amount of rain we have had as late think it is all good. The setup is very versatile since only six screws come off to remove the 3 heavy duty bars and you have caps that go on the RCP feet.

    My only problem is my tray I kept from the 120 is 1500 long and too short for the 3 rails so I need a longer one.

    Anyone interested in buying a 1510 Rhino tray! :-)

    Leave a comment:


  • ss--ss
    replied
    We have one of those repco rola racks also.. I take it off when not in use as the wife complains about shopping centres, however only takes a few minutes to install, I think it's great however I was thinking of putting a metal mesh on the base ?

    Attached Files
    Last edited by ss--ss; 28-01-2012, 02:00 PM.

    Leave a comment:

  • babs
    Senior Member

  • babs
    replied
    I have the ARB deluxe alloy rack with a Foxwing attached - takes approx 3 mins to set up and I think it is awesome.

    Fully approved and funded by the Minister of Finances!!!!!!!!!!!!!!!!

    Leave a comment:

  • Guest
    Guest

  • Guest
    Guest replied
    MLC might be interested in the 1510 tray.

    Leave a comment:


  • LostDingo2
    replied
    I took my rails off and did just as you want to end up with Rob. Bought my Rhino kit straight from Rhino's showroom and no one ever mentioned a waterproof membrane? Anyway the RCP feet comes with the fittings which also has the foam washers for sealing etc.

    I have had no issues or seen any leaking and considering the amount of rain we have had as late think it is all good. The setup is very versatile since only six screws come off to remove the 3 heavy duty bars and you have caps that go on the RCP feet.

    My only problem is my tray I kept from the 120 is 1500 long and too short for the 3 rails so I need a longer one.

    Anyone interested in buying a 1510 Rhino tray! :-)

    Leave a comment:

  • Johno
    Junior Member

  • Johno
    replied
    Rob,

    I took my roof rails of myself. With the 120 model they had the covers that replaced the legs that went into the roof rail. For the 150 model they dont.

    They suggested to silicone the holes. I silicone around the holes then put the bolts back in the roof and put more silicone around them. I made sure I can take the bolts out when im ready to put roof racks on.

    Johno

    Leave a comment:

Working...
X