Tweet
Guess you can strike Black Widow off the list now. Reason: administration, receivership, liquidation....
-
-
Another vote for Drifta. I've the exact same draws as Craig in my 120 with a 55l evakool. I'm 185cm and gave no issues, and my wife is 156cm. She just climbs up on the bumper bar. The table is great and has got some looks when folded up and put away.
The Teflon slides have never stuck as Ive heard some mechanical slides do when they get gunk in. They're a cinch to clean too. They're also quite light compared to some of the other makes I've seen advertised because the don't have mechanical slides. I can get them in and out in less than 5 mins by myself.[SIZE=2]120 GXL D4D Auto, with a 'List of Wants' greater than the 'List of Needs' greater than the 'List of Haves'
Nissan Patrol: Keeping Bogan's out of Toyota's since 1951[/SIZE]Comment
-
That must have happened quick, they have 2015 New Years messages on their website!Originally posted by amts View PostComment
-
Another vote for Drifta drawers, no rattles whatsoever, drawers slide well even when fully loaded. The integrated table is a must have. I also have their built-in fridge slide on the left which handles my Waeco CFX-50 perfectly. We also have the fridge divider, and the drawer insert in the left hand side drawer.
Slide RHS table part of the way out, slide LHS fridge out and get your drinks and food out and place on the table. Slide the fridge back in, open the LHS drawer and get the bread, knives out etc and place on table. Great for mixing drinks, making sandwiches on. Your wife will love it. There is a caravan step we purchased from SuperCheap which the wife uses with ease to get up into the fridge. I'm 6'5" so it doesn't bother me at all.
We has ours made a fraction higher, on good advice from Beechey at Drifta, because of the fridge slide and table storage area. They are ~210mm high inside the drawers. High enough to stand a can of WD-40 etc. upright.
They are 50mm wider internally than normal steel drawers because there are no big ball bearings involved. Seats are still in fully slid back position, but don't recline anymore. I don't sit in the back anyway
We now fit into the two drawers what used to take 4 plastic containers. The difference now is that we just slide a drawer out and everything is there and visible. We can still fit 2 plastic containers stacked on the RHS deck, and other bits and pieces in front of them.
My wife and I really don't know how we went without them before, but I suppose that would also apply to any drawer setup.Here for a good time, not a long time!
2013 Toyota Prado GXL D4D AutoComment
-
Just to go back to near the start, built my own draws & have a MSA drop down Fridge slide.
3 years now, slight rattles early & all ok now & cape Leveque 3 times, 45Lt Engle.2011 GX Blue Storm Auto D4D
2" OME Lift, BFG AT's, Speedy Avalanche Wheels, ARB Bar, Safari Snorkle, Duel Batt Setup, TG150 Guard, TJM Side Steps, Tinted, Spotties, Draws, Rhino Platform, Recovery Points, Tin175 UBP.Comment
-
How did you stop the rattle?Originally posted by Bigben View PostTerry
Canberra
2008 Prado 120 D4D and 2010 Jayco Swan OutbackComment
-
I heard this too but the ASIC Register says otherwise:Originally posted by amts View Post
https://connectonline.asic.gov.au/Re...=11p0d6f45g_22
Status: RegisteredCheers
Micheal.
2008 GXL D4D Auto. GOING... GOING... GONE
2015 GXL 1GD Auto. And it begins again...Comment
-
Cheers
Micheal.
2008 GXL D4D Auto. GOING... GOING... GONE
2015 GXL 1GD Auto. And it begins again...Comment
-
I have the Drifta set up with the table. Very happy. Had a Blackwidow drop slide on order for about 4 months. Ended up getting a demo slide form Blackwidow in as new condition for half price! Seems they are clearing out anything they can sell?
It's a huge shame about how the company has been let slide! No pun intended!! The stuff they make is great even if it comes at a premium price, but no good if you can never get your order. I really hope some one steps in and keeps their product line going. My ES 1.0 is the sexiest piece of gear around. Love it.Comment
-
Here's Another vote for Luke and Drifta . Had mine for over a year now great set up with a msa drop down holding a waeco 65 . Insert draw the table is great when fishing or camping and plenty of room in them with no runners you get extra space. I cant find a negative thing about them at all ...Comment
-
I've had Drifta drawers and have just installed an ORS Fit out. Both Drifta and ORS in my opinion make an excellent product! I've only recently removed my drifta's to make way for a much larger ORS system. I chose ORS for the bigger system purely because they do the stainless water tanks and they're a lot closer to where I live. Great service and products from both of these!!Comment
-
Another vote for Drifta. I have a custom made setup with fridge on left on the floor and two drawers on the right, one on top of the other with a table mounted vertically in between. Great quality, no rattles. Would buy again for sure.[B]White D4D GXL auto Mickey Thompson ATZ 4 rib 265/70 R17, Genuine towbar, OME Suspension, ARB Sahara bar, Safari Snorkel, Icom 440N UHF, Rhino sportz bars, redarc BCDC1240 dual battery system, Drifta drawer setup, headlight upgrade.....more to come....[/B]
My Rig Build [url]http://www.pradopoint.com/showthread.php?24451-Mark-s-White-D4D-GXL[/url]Comment
-
Had Fourby Fitouts in the 120 but now have a homemade setup with Drifta drawers. Fourby Fitout quality is excellent, however I saved a fair bit of dollars by making my own setup and adding Drifta drawers. I carry a heap of weight in the Drifta drawers and they continue to work really well.
CheersWhite 2012 GXL 150 TD Auto. Work in progress. Aiming to spend less than when I kitted out the 120!Comment
-
Ive got ORS drawers and have been very happy with them.Comment
-
Another Vote for the Drifta Drawers, mine got delivered yesterday for my Prado 150, great product, well made and the service is fantastic
Comment
Comment