Toyota seem to think its ok when its cold. Because my injector values are all within spec, they're not concerned.
I just find it strange how it...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
130 results in 0.0119 seconds.
Keywords
Members
Tags
-
Cheers mate.
Its quiet once it gets warm.
Ill just drive it more
Leave a comment:
-
My 2013 150 started becoming noisy so took it in to toyota and they found injector no3 was out of spec.
They replaced it under warranty and now...
Leave a comment:
-
No beep when i lock my doors
For some reason i cant hear a beep when i lock my doors.
When i unlock , i hear the normal beep beep.
-
My harness plugs into the injector lines, then i have a + and - that goes straight on to my Battery.
takes 5 mins to put on and take of...
Leave a comment:
-
+6 offset works with a 2 inch lift. i was getting a bit of scrubbing on the drivers side on full lock.
Leave a comment:
-
Ive got front and rear ARB lockers in mine. At 10,000ks both seals wore out apparently because ARB put the wrong oil in it. Oil went back up into the...
Leave a comment:
-
17 x8.5 rim..
Driving around town it felt good. Speeds over 100 made the car feel unsettled.
Any increased track width will...
Leave a comment:
-
I found it hard for the torque converter to lock, so torque converter temps were at around 110-115 degrees and when the car changed gears i could feel...
Leave a comment:
-
Personally i think it will be too loud.. Try it, if you dont like it then ask for a muffler....
Leave a comment:
-
Ive taken the 285s off because they were getting caught up on the inside on full lock while I was off roading.
The weight of the tyres was also...
Leave a comment:
-
I ended up buying a blanking plate but my fingers are about 0.5mm too short so i cant slide the plate in.. LOL
Leave a comment:
-
Done about 1500 ks and i have a little bit of dried up oil in the outlet pipe. I wrapped a rag around a screwdriver and shoved it into the pipe.
...
Leave a comment:
-
Very easy.
I can plug and unplug mine in about 5 mins flat.
You don't need a mechanic to plug it in...
Leave a comment:
Leave a comment: