Rear Draw reviews and preferences

[kenny5000 Advanced Member Find all posts View Profile Close kenny5000]

Another Vote for the Drifta Drawers, mine got delivered yesterday for my Prado 150, great product, well made and the service is fantastic

[ATTACH=CONFIG]19299[/ATTACH]

[ATTACH=CONFIG]19300[/ATTACH]

[ATTACH=CONFIG]19301[/ATTACH]

Hi Mate, are the Drifta drawers in your configuration with the third row seats still in meant to have trim around the side and ends to enclose the drawers??

[JimmyC Advanced Member Find all posts View Profile Close JimmyC]

Anyone with drifta drawers in their 150 will the false floor that's installed cause problems if I want to run 8mm cable up through the rubber grommet in the centre of the floor? Just pre-planning with excitement for when mine get here next week!

[AussieAndy Find all posts View Profile Close AussieAndy]

I ran 25mm cable under the drivers side scuff panels on mine, fits fine up there and the wiring is better protected inside the cabin. Just how I did it, but I have black widows so no idea about the drifta setup

[JimmyC Advanced Member Find all posts View Profile Close JimmyC]

yeah that's how I got the 6mm I have now. Thinking it may be neater to run it down the rails. getting wire thru the grommets is just the biggest pain

[RobCrick Junior Member Find all posts View Profile Close RobCrick]

Hi All
I am wanting to get some rear draws and like the look of the Off Road Systems draws. http://www.offroadsystems.com.au/doc...0_2012_P&O.pdf

Does any one else have these draws and are they ok? I am undecided whether to get the fridge pack with one draw or 2 draws sise by side and then get a drop down MSA fridge slide
Does any one have any experience with pro's or cons of these units.
Can any one else recommend any other brands that they have used before
Cheers in advance Corny

Hi Corny, I have drawers in my 90 series from Full Boar Fourbie Drawers. www.fullboarfourbiedrawers.com.au

I actually brought them off jessejames on here (Thanks Jesse!).

I am REALLY HAPPY with them. I had a mate help me install them who used to work in local ARB shop, and he has another brand in his Patrol, and he was very impressed in the quality of them. My set up has fridge slide on one side, large drawer and small drawer on the other side, and side wings which have heaps of extra space in them. Heres a pic:



They also came with cargo barrier to match, and I have been in touch with them for a centre divider and top shelf also to be added to it.

Only down side is they are made of marine grade timber with very solid runners and tie down points. Because they are so sturdy, they do come with a bit of extra weight as opposed to some of the metal/ alloy ones out there that are very light, and the couple of different brands I have seen appear quite flimsy...

Worth looking into.

Cheers

[150gxl Member Find all posts View Profile Close 150gxl]

Looking into draws now so wondering if there are any updates eg.

Are the Driftas still going well?
Is Black Widow back in business?
Any new players who may be building a quality product?
And any suppliers and fitters in Brisbane area that can be recommended?

Thanks in advance,
Kel

[AJ120 Out of control poster! Find all posts View Profile Close AJ120]

Is Black Widow back in business?

Kel

No, they are finished!

Cheers Andrew

[120D4D Avid PP Poster! Find all posts View Profile Close 120D4D]

No, they are finished!

Cheers Andrew

But the big fella is back in business under a new name - saw him at the 4wd show the other week...

[AJ120 Out of control poster! Find all posts View Profile Close AJ120]

But the big fella is back in business under a new name - saw him at the 4wd show the other week...

Interesting.

Cheers Andrew

[peterpanner Junior Member Find all posts View Profile Close peterpanner]

Sorry to join the thread after much time. I have Drifta drawer system and MSA drop slide with Waeco Dual Zone 65L fridge. All are great and I recommend them. Drifta are located in Gloucester NSW but may have agents in other states or you could fit drawers yourself. 3rd row seats need to be removed and you will find instructions on here: (https://www.toyota-tech.eu/). Drifta drawers use Teflon strips which take up less space but slide really well even when full of heavy camping & prospecting gear. Not associated with any products - just a fan.

[Russell Junior Member Find all posts View Profile Close Russell]

Interesting.

Cheers Andrew

Yes, came across their websirte the other day http://www.rvtradeandfleet.com.au/about-us

"We have been manufacturing storage solutions in the Australian and International 4WD and Trades sectors for almost 25 years.
Our previous business Black Widow 4WD Products was renowned for our quality and cutting edge technology."

[120D4D Avid PP Poster! Find all posts View Profile Close 120D4D]

Interesting.

Cheers Andrew

Very. Pity I didn't take notice of the new name, I wonder what Clearview think of that after buying his drop-down fridge slide system.

[Rainman Advanced Member Find all posts View Profile Close Rainman]

Looking into draws now so wondering if there are any updates eg.

Any new players who may be building a quality product?

MSA are about to launch their version of drawers in the next week or two. I saw them at the Perth 4wd show over the weekend, they look very nice but the price is a bit of a choker - estimated to be around $2600 from memory.

[AussieAndy Find all posts View Profile Close AussieAndy]

How about customers of Black Widow who didn't get what they paid for and had to pay other companies to fix up/make missing/wrong parts??
I know I'm not happy

[150gxl Member Find all posts View Profile Close 150gxl]

Thanks for replies. Give me something to work on, cheers.