Interior trim color

[madmax1982 Junior Member Find all posts View Profile Close madmax1982]

Hi, I want to paint the inner door handles because are scratched, does anybody knows color code for this gray paint? If cannot find it I plan to start with silver and add black until get the closer match

[hulbyw Senior Member Find all posts View Profile Close hulbyw]

On my 120 I took a sample to a paint shop and they mixed up a rattle can. Wasn't a bad match. I think you will find the 150 has a more complex mix than just silver and black, but I am no expert
Cheers

[madmax1982 Junior Member Find all posts View Profile Close madmax1982]

I'll go to a paint shop, maybe they can prepare it

[Gogetter Junior Member Find all posts View Profile Close Gogetter]

I wouldn't think a replacement for this would cost much? they are just plastic covers?
Might not be worth the effort if replacements are cheap?

[madmax1982 Junior Member Find all posts View Profile Close madmax1982]

Actually I didnt ask to the dealer, thats a good idea, but I dont think this will be available. The a/c vents on passenger and driver side were broken, at dealer cost 300.00 each one, found them used at 40.00 and changed both myself. Was really easy, but all used handles I've seen are worse than mines.

[mullerwh Member Find all posts View Profile Close mullerwh]

I like how this guy wrapped his...but don't think I could trust myself to do a good job http://www.pradopoint.com/showthread...l=1#post318151

[retroenduro Member Find all posts View Profile Close retroenduro]

Guys does anyone know how you remove the silver trims on the doors? Is it just a careful lever them off job? I have trim removal tools so i dont knackere them but wanted to get some knowledge before i have a go....

Going to repaint them all and laquer the hell outta them! that should stop the scratching!!!!

[madmax1982 Junior Member Find all posts View Profile Close madmax1982]

I just pull them with my fingers from the edge behind the door lock

[retroenduro Member Find all posts View Profile Close retroenduro]

cool cheers for that. just wanted to know where to get started on them.

[bruggie Junior Member Find all posts View Profile Close bruggie]

I wouldn't think a replacement for this would cost much? they are just plastic covers?
Might not be worth the effort if replacements are cheap?

Checked price with Amayama and cost was around $30 per trim. Shipping cost for one was about $30 also but that may cover all 4. I decided to leave it for now and think repainting is the better option. Would be interested in the correct paint color too. Cheers, Fred

[retroenduro Member Find all posts View Profile Close retroenduro]

Checked price with Amayama and cost was around $30 per trim. Shipping cost for one was about $30 also but that may cover all 4. I decided to leave it for now and think repainting is the better option. Would be interested in the correct paint color too. Cheers, Fred

well bugger that..went to a paint place and they wanted to charge $40 to colour match and then 37.50 for the can...$80 bucks for a can of spray paint wtf?

where does everyone get these cheap quotes?

any 'close enough' matches that are sold in supercheap/autobarn that anyone knows about?

[hulbyw Senior Member Find all posts View Profile Close hulbyw]

I know this is a very old post but I recently had my GXL 150 door pulls colour matched at The Body Shop. The match is not bad and the can says Toyota UAA2. I finished the door pulls with a full gloss clear however if doing again I would probably use a satin clear. New replacements from Toyota are around $50 each