Inverter upgrade in GXL

[daniel Member Find all posts View Profile Close daniel]

I am absolutely dumb struck at your attitude toward electrical installation and safety, and the fact that you posted it on a public forum.

As a qualified industrial and marine electrican, if you asked me to sign off on your install - well, i shouldn't have to mention what i'd say.

ii completely agree with you im a electrician i come across it all the time people ringing me up asking for a certificate it really pisses me off apart from that what they did is probably dangerous
30 ma is not the lowest current 30 ma will most likely kill you or completely ruin your life
dont forget you can still receive harm from 10 ma it depends on point of entry and exit

i could go on about this for hours but if your not a electrician or auto electrician stay the heck away from electricity

[timmay5.7 Advanced Member Find all posts View Profile Close timmay5.7]

Hahaha. Didn't like the reponse, so you edit all your posts in the whole forum.
Nice one.

[Matty80 Avid PP Poster! Find all posts View Profile Close Matty80]

I think that just about concludes the discussion on this topic.

This forum, darecki, is a public forum, and the ideas shared by its members are there for all. But more importantly the ideas shared should not endanger life, through any direct or indirect methods or actions.

[darecki Sooky & Banned Find all posts View Profile Close darecki]

This forum, darecki, is a public forum, and the ideas shared by its members are there for all. But more importantly the ideas shared should not endanger life, through any direct or indirect methods or actions.

Then start whinging everywhere else pls. Did you see threads about 12V thick cables? Who knows whether they are fused properly. Who knows whether they are shielded enough and far enough from the body. They may cause fire! How about DIY HIDs? As an electrician you know what is operating current and startup flow for a HID burner. Have you seen that in EVERY manual for a car equipped with factory HIDs they state that the owner musn't touch HID burner which can be replaced by the dealer only? So - how about people endangered by this? How many are trained? Have you seen threads about fuel tanks? What if they leak? What if they fall? Are you sure that everyone who is able to read this forum is also able to install HID or a fuel tank? Why I didn't see you there? Going back to your occupation - have you seen threads about replacing fuses by diodes? As an electrician do you think they work the same way? Have I seen you whinging there?

However, I've found that because of you and a few others I am wasting time on pradopoint.com. I don't really need to teach anyone in my spare time, just wanted to share because I've found some interesting stuff here. You changed my mind so that I won't anymore.

[Davros Advanced Member Find all posts View Profile Close Davros]

[Guest Close Guest]

The original poster has been banned for his ridiculous outbursts and being a total w@nker and removing all his posts on the forum, thus making many threads not make sense.. Lifetime banning for that one alone.

The method of installing live 240 volt into a vehicle is ridiculous and also illegal in the method he is stating he had done it..

And you state you have worked on live 25 kv... Hehe that would have bit you way before you got close enough to work live on it...
Seriously....
You class yourself as a trained person, I think you might need some retraining in that trade and certainly in your dispute resolution skills.

Thread closed..