Hi guys,
I'm having issues wiring up my Stedi spotties with my 2018 Prado. I know it has the CANBUS system and I've purchased the ARB wiring loom to suit the canbus system. Have run all the cables that tap into the headlight stalk and provide the trigger wire to the driving light harness. The trigger wire is working 100% correct for all the situations (AHB on/off, stalk forward/back and hi/low beam etc) However my Stedi Pro lights driving light harness has it's own relay and then a 3pin connector back in the cab. (white, blue and black). I've got a AirOnboard push button switch that I want to hook these spotties up to but whichever way I wire this switch it overrides the trigger wire and turns the spotties on regardless of low beam, hi beam or no beam.
I read some other threads and guys have mentioned they've had issues getting the on illumination to work with the light, and have had to resort only to the dash illumination for the light.
My issue is regardless of which way I wire the light as soon as I push the button in the cab the spotties come on.
I've attached the switch diagram and a rough drawing of my setup.
If anyone could help point me in the right direction that would be great.
Thanks,
Brad
I'm having issues wiring up my Stedi spotties with my 2018 Prado. I know it has the CANBUS system and I've purchased the ARB wiring loom to suit the canbus system. Have run all the cables that tap into the headlight stalk and provide the trigger wire to the driving light harness. The trigger wire is working 100% correct for all the situations (AHB on/off, stalk forward/back and hi/low beam etc) However my Stedi Pro lights driving light harness has it's own relay and then a 3pin connector back in the cab. (white, blue and black). I've got a AirOnboard push button switch that I want to hook these spotties up to but whichever way I wire this switch it overrides the trigger wire and turns the spotties on regardless of low beam, hi beam or no beam.
I read some other threads and guys have mentioned they've had issues getting the on illumination to work with the light, and have had to resort only to the dash illumination for the light.
My issue is regardless of which way I wire the light as soon as I push the button in the cab the spotties come on.
I've attached the switch diagram and a rough drawing of my setup.
If anyone could help point me in the right direction that would be great.
Thanks,
Brad
Comment