Installed Tin's plate some weeks back. As per the second photo from post # 368, loosen the 2 bolts facing the firewall. They are little fiddly to access but came loose without too much effort. Gently break apart; the metal gasket does not remove; once gap is enough slide the plate in; mine went in quite easily; I put the plate to right of gasket as per the photo. Then tighten nuts. All up quite quick. Certainly seems easier on the 2.8l engine. So far no error codes. Thanks to Tin, and I understand Hally for orginal testing, for another great peice for the 2.8l Prado.
GERRY
GERRY
Comment