Thought from memory it was one wire to each side of the switch with the tow pro?
HKB Electronics, manufacturer of the Alternator Voltage Booster, Silver 2008 D4D,Lifted,Underbody protection, Alternator Voltage Booster, Tiger Z winch, Lightforce DL, Air Horns, Tanami Drawers, Drop down fridge slide, Outback cargo barriers, Rotronics dual Battery system, Polaris GPS, HF/UHF/VHF, Radio speaker combiner, Long ranger water tank, Diff breathers, Inverter, Snorkel and others
The instructions only have one wire (red) to switch. You can wire to brake lights with a diode. Probed the switch last night and found a wire (purple) which is on the brake light side and seems to activate the controller, however when I use the manual function the led on the start button illuminates
Everyone says how good Redarc support is, for curiosity one of you should point out the problem to Redarc and see what they have to say?
HKB Electronics, manufacturer of the Alternator Voltage Booster, Silver 2008 D4D,Lifted,Underbody protection, Alternator Voltage Booster, Tiger Z winch, Lightforce DL, Air Horns, Tanami Drawers, Drop down fridge slide, Outback cargo barriers, Rotronics dual Battery system, Polaris GPS, HF/UHF/VHF, Radio speaker combiner, Long ranger water tank, Diff breathers, Inverter, Snorkel and others
You can connect the brake controller into the rear brake light on the car. Blue wire is used for the trailer brakes where the jack is located. Good luck
2018 150 Series Crystal Pearl Prado VX 2.8l. 2 inch King springs and Bilstein shocks, Airtek TJM snorkel.
Comment