Coil spacers on stock suspension

[TurboD4D Member Find all posts View Profile Close TurboD4D]

50mm will be ok in front end, but do not use coil spacers at all. It will top the struts out and smash them to bits.
If you are going to do it this way, use strut top spacers instead.
Something like these below.
http://www.superiorengineering.com.a...ducts_id=19821

For the rear, the shocks will be too short to have any effective downward travel if you put a coil spacer in.
I would recommend longer rear shocks & proper raised coils. It doesn't have to be HD to raise it.

Regards, Jason.

Has anyone put any of these on to there rig? I was looking at these to match the front lift to the rear.(level out the car)
The price is a bit steep. Cant see why you couldn't get a toolmaker to whip a spacer up for a carton. As this sits between car body and strut assembly it shouldn't have any impact on strut travel for top out or cylinder crush.

[AJ120 Out of control poster! Find all posts View Profile Close AJ120]

How much do you need to lift for it to level out? Here's an option for a small lift http://www.pradopoint.com/showthread...-Strut-spacers

Cheers Andrew

[BiLLz0r Advanced Member Find all posts View Profile Close BiLLz0r]

I'm considering these to bring the front back up a little. The rears shocks were upgraded to KYB's for towing (previous owner) but the front is stock and with a ARB bar it's sagging more and more.