What did you do to your 90 today?

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

If you have sealed all the holes in the doors, do you have any pics of that?

I'm in the process of upgrading the setup on my 150 and the holes in the doors are not on a flat plane i.e the left side of the large hole is more recessed than the right side by about an inch. I'm trying to figure out how I'm going to close it up.

Sound deadener. Close that hole right up.

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

Today I finished the wiring for my halloween prop. Just need to pull the rat of it together to scare the crap out of some people.... here is the setting...

My car is parked out on nature strip corner. I have these stupid multicolour LEDs strips underneath the car doing their flashy thing... cal so playing from underneath is happy halloween music the monster mash... as people approach the car, the music and LEDs stop flashing. Then within 2 seconds a bright red led mounted on the steering column come on and lights up the scarecrow with an evil jack o lantern head sitting in the drivers seat. As this happens, my headlights start flashing rapidly, my roof mount led bar switches on and blinds them as the engine starts with a servo attached to my throttle cable that will pull the throttle cable and rev the engine repeatedly.

Then dial 000 for the heart attack sufferers.

[rorza Member Find all posts View Profile Close rorza]

Hahaha sounds great. Please record a vid of it haha.

[brissy Member Find all posts View Profile Close brissy]

preferably a video with trick or treaters jumping out of their skin !! Great effort Ran j , that's sure to win funniest home videos

[Playdoh96 Member Find all posts View Profile Close Playdoh96]

Finally got round to fitting the new Dobinsons suspension kit I've had sitting in the shed for a couple of weeks. Wow what a difference. Did have a 2" billy/king spring compo, but was well past its used by date. Ended up with a 45mm lift in the front, 40mm in the rear from what it had. Got the old girl booked in for the upper and lower control arm bushes in the next couple of week's, and with a wheel alinement should be a pleasure to drive again

[oceanracer Moderated member Find all posts View Profile Close oceanracer]

My dobinsons have been in view a few mths now, feels like is new again, couldn't be happier

[fridayman Senior Member Find all posts View Profile Close fridayman]

Sound deadener. Close that hole right up.

I found some very thin sticky back aluminium sheet that is quite easy to mold/shape. So I'll use that first and then cover it with a layer of Fatmat.

[fouadar Lurker Find all posts View Profile Close fouadar]

1996 rz

[fouadar Lurker Find all posts View Profile Close fouadar]

From Pakistan.

[glen_ep Addicted PP Member Find all posts View Profile Close glen_ep]

Fouadar,
nice rig!
where is that rear bump stop from?

[RanJ Avid PP Poster! Find all posts View Profile Close RanJ]

Decided to fit my window roll up modules today. But then I saw how much of a mess I'll be making of the drivers door harness so I've unwrapped it all and am integrating the new wiring into as well as converting the entire loom in woven split loom. Plus adding more sound deadening to it.

[Playdoh96 Member Find all posts View Profile Close Playdoh96]

The list is getting shorter ☺


New bar fitted, and new suspension working well.

Happy new year guy's, have a safe one

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

Very nice.

[juc33_prado Advanced Member Find all posts View Profile Close juc33_prado]

Finally did my fold down rear door table.

Used teflon board I had at home, along with straps and hinges.
Had to get a few stainless bolts and the elastic loop and stay.

Went together pretty easily.

SAMUEL

[juc33_prado Advanced Member Find all posts View Profile Close juc33_prado]

Finally got to remove my old sidesteps and replace with the Roo Systems Sliders.

Went in actually all well (unexpectedly)

Bargain for $349






SAMUEL