The 90 series Sucessfull D4D Conversion

[khorrassany Junior Member Find all posts View Profile Close khorrassany]

1KD again!

Hey Folks...need to get this thread back to life!

I still didn't do a bit to the 1KZ-TE engine on my prado 90. I was travelling in Thailand and found a guy that carries the 1KD and can do the wiring for me as well anyway it'll cost me around 3700 USD for the engine and all the wiring to run the engine and freight to Egypt.

So just want to do a quick revision on things needed and things that gone be replaced:

1. replace the oil sump on the 1kd with the 1kz
2. air sensor for 1KD
3. accelerator pedal for 1kd
4. 3 computers on the wiring attached in pic
5. Same gearbox R150 can be used on the 1KD without any mods

So please let me know if i forgot anything ? Also if I need to change the complete dashboard or it'll be compatible with the 1kd sensors?

[LIKKLEbit Lurker Find all posts View Profile Close LIKKLEbit]

Double revive request! @khorrassany, have you done the swap?

[Skyhi Lurker Find all posts View Profile Close Skyhi]

I need some photos and info on the wiring of this conversion I have a manual Prado 90 can it still be done ?? As much info as you can provide me I greatly appreciate it as I need that d4d in my 90

Email me all the info at [email protected]