Sway Bar D-Bush

[glen_ep]

There are 2 sizes of front sway bar on 90 series. 25 and 26mm from memory. I like to run 1mm larger ID than bar to prevent bush curl out

[RanJ]

Wait a minute... people still have their swaybars on their car?

[MrGreenz]

Thanks for the Info Gihan, very usefull

Completed the job with 26mm bushes, i believe it was stamped on the bar to confirm the diameter.

Ended up using nolathane ones

[Gihan]

Hi MrGreenz,
Welcome to the forum. Try amayama.com for OEM stuff or your local stealership. Recently I replaced mine with OEM and made a huge difference. I also replaced the links and the link bushings as well.
Find out the OEM part numbers from japan-parts.eu so you know exactly what to order, so you do not have to measure the diameter
For Superpro stuff, I used sparesbox.com.au. I replaced the steering mount bushings with Superpro.
Good luck.
Cheers,

[MrGreenz]

Hi all,

I'm looking at replacing my D bushes. Will probably do the link bushes aswell

I'm struggling to be sure on the bar sway diameter, I wrapped some tape round and then cut and the tape read 26.7mm when divided by pi.

Although looking online it's kinda looking like a 25mm from the little i can see.

I'm thinking go 26mm..... cant be too far wrong then hey?

Also where is a good place to pick these up? I see superpro do poly ones

I think this is what im chasing:

48815	BUSH, FRONT STABILIZER BAR, NO.1
48815-35100

The car is a 99 RZJ95R 2.7 petrol

Thanks,

In advance