fitting 33" or 285/75/16 tyres to 90 series?

[Brodie120 Lurker Find all posts View Profile Close Brodie120]

...

[bonesyo Lurker Find all posts View Profile Close bonesyo]

Just some pics of my prado riding on 33s, not sure of suspension lift as previous owner had done it ( he said 4 inches of suspension and 2 inches of body.

http://s28.postimg.org/9t28k1vwd/image.jpg

http://s17.postimg.org/3vtn2mz0f/image.jpg

http://s9.postimg.org/m4498e3kv/image.jpg

http://s2.postimg.org/fcse9i8c9/image.jpg

http://s9.postimg.org/in6sj5twf/image.jpg

http://s16.postimg.org/wou646t45/image.jpg

http://s24.postimg.org/dijhzpdb9/image.jpg

[bonesyo Lurker Find all posts View Profile Close bonesyo]

I have to climb into it (and fall out)

[froggysteve Lurker Find all posts View Profile Close froggysteve]

Hi folks - here is a pic of my 95 with a Pedders lift (50mm+?) and 265/75/16 coopers. The rims have a neg 25mm off set and yes it rubs! I have to take a bit more off, but having just fitted the winch bar, I reckon its dropped a bit, making the rubbing worse. (full lock and more so in reverse?) So, plan is to fit the HD Pedders Springs to lift it back up again!

[LiftedLux Lurker Find all posts View Profile Close LiftedLux]

G'day all. I was just wondering if anybody has Tubbed their 90 series and fitted 33's? I'm considering going down this route.

[4x4newbie Lurker Find all posts View Profile Close 4x4newbie]

Ive been thinking about fitting 285/70r16 on my 90. Would going with a 3 inch lift mean I wouldnt have to worry about the scrubbing on the front. Would a diff drop be enough or do I need to do other things. Does the extra lift get better articulation as well.

[glen_ep Addicted PP Member Find all posts View Profile Close glen_ep]

The easy way to lift 3" is with spacers or very HD coils - but both of those options will rob you of articulation. The only way to get the best articulation is by using soft coils for 1-2" lift max, and get a bodylift for tyre clearance

It's possible to get 285's in a 2" lift but you'll need to do some guard trimming, and keep rim offsets original (+15) or 0 if you want to make it easier. Going negative offsets looks cool and makes the vehicle more stable, but it increases the rubbing issues.

[drecoopz36 Lurker Find all posts View Profile Close drecoopz36]

hey mate what mods did you have to do to fit those? ive got 2inch lift and what offset sunnies you got there? cheers