Hi Samo
Where did you get the coil spacers from?
Thats exactly what Ive been looking for (and havent been able to find ).
Cheers
Marc, 2003 Grande V6, Just a Bit of Stuff Done..........Work in progress.
[url=http://www.pradopoint.com/showthread.php?21168-1Coolbanana-s-Grande-Build-Up]1Coolbanana's rig build up[/url]
Excellent, thanks for that info.
Have they held up ok? havent shifted or squashed out?
So how much you reckon it lifted the front, about 30mm???
Marc, 2003 Grande V6, Just a Bit of Stuff Done..........Work in progress.
[url=http://www.pradopoint.com/showthread.php?21168-1Coolbanana-s-Grande-Build-Up]1Coolbanana's rig build up[/url]
Hi Samo
Where did you get the coil spacers from?
Thats exactly what Ive been looking for (and havent been able to find ).
Cheers
I have been told by the guys at Snake Racing that you should not use spring spaces if you have a lift only to be used with standed springs as I was looking at this option to fix the sag in the front end of my PRADO. Found out that Ironman make a 3inch spring that fits the front and this helped my problems
04 GXL 3L TD Toyota Bullbar 2"TJM lift TJM OX hyd winch Blackwidow draws 40LT Engel dual batteries Mickey Thompson ATZ's Steinbauer P Box Airtek snorkel (colour coded)
Its now gone sad to say but enjoying the replacement LC200 with a BIG list of bits to add.Lifted pre rego
Marc, 2003 Grande V6, Just a Bit of Stuff Done..........Work in progress.
[url=http://www.pradopoint.com/showthread.php?21168-1Coolbanana-s-Grande-Build-Up]1Coolbanana's rig build up[/url]
gday samo like the plates mate are they from TJM in jesmond? what was the cost
[SIZE=5][SIZE=1][SIZE=2][FONT=arial]120 gx 6sp man,tjm gold edition 2",maxxis bighorn,toyota ally bar with toyota super winch,light force xgt hid 50watt,duel batts,safari snorkel,diesel care secondry finer filter,redarc low coolant alarm,turbo timer,gme uhf,hema hn5i nav,tjm basket,red centre roll out awning,diy rear table...[/FONT][/SIZE][/SIZE][/SIZE]
the other week i installed a 100amp/h full river gel battery and a redarc isolator, also need to wire up a switch to link the batteries together, was a very tight squeeze to get the battery in but with a few mods to the tray we got it. cheers samo
had an 03 gx 120 with some gear now got a 2013 bt 50 GT auto some ARB gear.
What type of tray are you using Samo? I want to place a fairly large battery (maybe not quite as big as Yours) when I do mine and like the look of the Off Road Downunder trays that also bolt on to the side of the inner guard for additional support.
well i put the new solenoid in the winch controlbox and put it all back together, pulls like a 14 yo schoolboy, $40 has to a cheap winch fix, and that makes me a very happy camper again. cheers samo
had an 03 gx 120 with some gear now got a 2013 bt 50 GT auto some ARB gear.
Comment