Originally posted by tendawolf
View Post
Announcement
Collapse
No announcement yet.
NSW: Saturday July 30th: Ourimbah State Forest
Collapse
X
-
I had an absolute blast today and a huge thanks to Glen, Declan, Steve and Max, who made the day so much fun
Tested the under body clearance and ramp over angle of a stock 150 quite a few times and yes, there were a few thuds but nothing damaged, broken or leaking, apart from the owner.
I was amazed at how far my 150 got with grand treks on and can only imagine capable the 150 is going to be with a lift and proper tyres and yes I will happily test again and again with these guys.
I am sure a couple of avatars will be changed after today by some very proud Prado owners with several feet of clearance under tyres[B]Dave[/B] - 2010 Silver GXL Prado 150 TD Manual.
Comment
-
Well we had a good run today. The weather was great for a change, though the tracks were still quite boggy
after recent rain.
Airing down not far from the F3.
Max trying a bit of rock crawling.
Glen leading us, in some mud, using a line that he had tried an tested on previous trips.
Then I decided to get a stick out and found an even better line.
[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
-
We then faced a chewed out climb.
We all made it through okay.
The next stop was the climb where glen_ep got his avatar.
Max's initial attempt at getting a pose shot ended in him being recovered by yours truly.
[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
-
Nearly there max!
Bingo!
My pose shot.
Back on the trails, Max taking a short cut.
[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
-
Stopped for lunch.
I decide to be more creative with my parking spot.
It did make getting back out interesting.
[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
-
Back on the trails.
Didn't get use the locker much today. (don't know if that's good or bad though...)
Its a pretty cool view of the pathway cut into the bush for the power lines.
[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
-
Pumping up tyres before hitting the F3 back to Sydney.
Thanks to all for coming today.
Videos to follow.....
Thanks Steve for this photo
Last edited by williade; 30-07-2011, 08:02 PM.[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
-
Excellent sequence of photos there Declan
In the last one it looks like your sitting on the barbed wire, ouch!
(I'm working on my videos, but they're HD and big, so might need to upload overnight)Last edited by glen_ep; 30-07-2011, 08:18 PM.glen_ep - engineered, 4" lift, 33" 255/85R16, lockers, 4.88 ratios www.pradopoint.com.au/showthread.php?17237 www.youtube.com/user/glenep www.fb.com/groups/ToyotaPrado90
Comment
-
Looks like a fun day
Are you happy with the new suspension Declan?Cheers,
Glenn
2002 GXL 3.4 auto with BFG AT's, Lovell's/Bilstein suspension, ARB steel bullbar, winch, towbar, diff lock, air compressor, GME UHF & AM CB radios.
[url=http://www.youtube.com/user/gh4wd?feature=mhum][b]Youtube[/b][/url] [url=http://www.panoramio.com/user/2941589][b]Panoramio[/b][/url]
Comment
-
Originally posted by GH4wd View PostLooks like a fun day
Are you happy with the new suspension Declan?
I got lazy and have uploaded all my videos unedited.
[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
-
[B]Declan[/B]: [SIZE=1]1997 GXL 4.5 Auto 80 series on [B][COLOR="#FF0000"]LPG[/COLOR][/B], ARB bullbar, 2" OME lift, 32" MTZ, GME UHF, rear ARB locker, Kaymar spare wheel carrier[/SIZE]
[B]PLANNED[/B]: [SIZE=1]3 or 4" suspension lift, 2" body lift (maybe), winch, 35" MTZ + roadies, front locker, sliders, cylinder head rebuilt for [B][COLOR="#FF0000"]LPG[/COLOR][/B], Garret [COLOR="#4499ff"][B]Turbocharger[/B][/COLOR][/SIZE]
Comment
Comment