WA Tech Day

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

if there's time, I also could do with help finding the reverse light power wire to tap my camera into

I can't remember if yours is manual or not Fishnut.... If it's auto, you can pick up the reverse signal from next to the auto trans shifter... Thats where I found mine :wink:

Mitch

P.S. If you'se are making up a radiator bash plate, would you mind building two? I can't be there due to working again Be good if you could come up and fit it too :wink: :lol:

[leachy_9 Advanced Member Find all posts View Profile Close leachy_9]

I'll be fitting some ATS side steps (once I've modified them to actually fit).
Leachy.

[Justo Advanced Member Find all posts View Profile Close Justo]

I can't remember if yours is manual or not Fishnut.... If it's auto, you can pick up the reverse signal from next to the auto trans shifter... Thats where I found mine :wink:

Or can be found as mentioned on the last post of this thread. Easier than pulling the console apart. Wish I had known that when I did mine.!! :roll:

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

I can't remember if yours is manual or not Fishnut.... If it's auto, you can pick up the reverse signal from next to the auto trans shifter... Thats where I found mine :wink:

Or can be found as mentioned on the last post of this thread. Easier than pulling the console apart. Wish I had known that when I did mine.!! :roll:

Yep, that'll do it...

You'll need to pull the centre console T bar surround out anyway to fit a screen or get to the back of the deck...

[jeff s Avid PP Poster! Find all posts View Profile Close jeff s]

:arrow: Mototrim. bashplate mods
:arrow: Chuck. Suspension, polyairs and snorkel
:arrow: Parksy. dual battery setup (allready purchased) and questions.
:arrow: Matt. Spanner chucker.
:arrow: Jeff. looking. possibly sliders. and spanner chucking, welding etc.
:arrow: Fishnut. spanner, snorkel passer... or visa versa..
:arrow: Leachy. sidesteps fitted.
:arrow: chippy. ?talking, laughing and other tom foolery...(beer drinkin)
:arrow: begs. Radiator protection plate.

edited

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

:arrow: Mototrim. bashplate mods
:arrow: Chuck. Suspension, polyairs and snorkel
:arrow: Parksy. dual battery setup (allready purchased) and questions.
:arrow: Matt. Spanner chucker.
:arrow: Jeff. looking. possibly sliders. and spanner chucking, welding etc.
:arrow: Fishnut. spanner, snorkel passer... or visa versa..
:arrow: Leachy. sidesteps fitted.
:arrow: chippy. ?talking, laughing and other tom foolery...(beer drinkin)
:arrow: begs. Radiator protection plate.

edited

C'Mon Jeff, you forgot about my Radiator protection plate :wink:

[jeff s Avid PP Poster! Find all posts View Profile Close jeff s]

Chippy / begs / mumsrig.

Radiator protection plate. Has anyone bought the metal for begs's plate yet? If not, mitch might be able to get his plate cut to fit if we can get some plate...? I have no plate at work. .

?

Jeff.

[MattWhite Advanced Member Find all posts View Profile Close MattWhite]

Do you mean the plate from the bullbar back Mitch or did you want to replace an original one?

[Steve & Sandra Senior Member Find all posts View Profile Close Steve & Sandra]

sorry to let you down again guys, i am unable to show up as i have to work nights....someone has to keep the power on for you.
would have liked some question answered in regards to wiring up the back of the prado with anderson plugs and accessory oulets.
Oh well maybe next time.

have a great day guys. Hopefully the women keep the food and beer up to you.

Cheers

Steve

[fishnut Advanced Member Find all posts View Profile Close fishnut]

This is going to become a confusing thread as there'll be several overlapping conversations :?

Anyway, just a quick update - I picked up a diode and then got all inspired, so the camera is all wired up and working a treat - it comes on with the reverse and it has a Narva switch to over-ride and give permament power - happy. So, more time to help others with their projects next weekend.

fyi - it is this one - I won it in a competition 8)

I mounted it differently - didn't use the supplied boom arm

http://www.aussievan.com.au/easyrearview.php

[MattWhite Advanced Member Find all posts View Profile Close MattWhite]

This is going to become a confusing thread as there'll be several overlapping conversations :?

If I wanted whinging I'd talk more to the missus! :lol:

[fishnut Advanced Member Find all posts View Profile Close fishnut]

Is there where I remind you that this is a public forum??? :lol:

[MattWhite Advanced Member Find all posts View Profile Close MattWhite]

It's cool fishnut, she'll never read this!!

[jeff s Avid PP Poster! Find all posts View Profile Close jeff s]

She will when I have the PC on at work with this page as a desktop....

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

Do you mean the plate from the bullbar back Mitch or did you want to replace an original one?

Yeah Matt, thats the one from the bullbar back...

Only if you'se have enough material and time...

PM me if you need some dosh put into your account...

Thanks mate.

Got some work done to the camper trailer this weekend. Installed a 56litre water tank and bash plate as well as a battery box... Just gotta plumb it up and wire it in now...

Have fun peops

Mitch