Ok. I'm waiting on the next batch. Could be a few weeks away.
Announcement
Collapse
No announcement yet.
ARB/TJM air compressor & fuel filter bracket for 120/150
Collapse
X
-
Hi i am a newbie to all this. i have read this thread from start to finish. looking at buying amts compressor braket mk2 for arb ckma12 compressor. someonelse asked if there was enough space to also install the arb soleniod actuated pneumatic valves for airlocker and the reply was it should. just wondering of anyone has tried and succeeded.
Comment
-
Originally posted by Jugsy66 View PostHi i am a newbie to all this. i have read this thread from start to finish. looking at buying amts compressor braket mk2 for arb ckma12 compressor. someonelse asked if there was enough space to also install the arb soleniod actuated pneumatic valves for airlocker and the reply was it should. just wondering of anyone has tried and succeeded.
Comment
-
Originally posted by amts View PostThe V6 from '05 or '06 has an extra large charcoal canister. If there is room to move it forward, there might be a possibility after fitting an offset bracket for the charcoal canister.
Up until now, I have not been able to see the engine bay of a V6 apart from mine which is one of the earlier models.
Cheers,
Jamie2007 Update 120 D4D, GXL Auto Option Pack 1 - ARB winch bar, ARB UVP, ARB tradesman rack, 2" OME, Safari Snorkel, HR towbar, Tigerz11 12000lb Grande, IPF 900 Extreme, W602C, Hilux Scoop
My Build [url]http://www.pradopoint.com/showthread.php?28720-Jamie-s-Prado-120-D4D[/url]
Comment
-
Originally posted by jamieprado View PostHi Andrew do you know if anyone has fit one of these to the later V6's yet?
Cheers,
Jamie
Comment
-
Excellent.
I have the MK2 bracket that came out of my diesel, now looking to fit it to my V6. Please let me know what you need, i am more than happy to measure, test fit or whatever is required to assist.
Regards,
Jamie2007 Update 120 D4D, GXL Auto Option Pack 1 - ARB winch bar, ARB UVP, ARB tradesman rack, 2" OME, Safari Snorkel, HR towbar, Tigerz11 12000lb Grande, IPF 900 Extreme, W602C, Hilux Scoop
My Build [url]http://www.pradopoint.com/showthread.php?28720-Jamie-s-Prado-120-D4D[/url]
Comment
-
I've got the 2014 Update D4D. Had a good look under the bonnet and assume I need amts's Mk2 but in order to fit it I need to move the empty relay box and bracket that's on the firewall. Have I got this right? I just want the fuel pre-filter, so am wondering if there's a solution that does not involve moving the relay box. I'm wondering if the relay box might fit into the compressor area of amts's bracket.
Thanks in adavancePrado 150 2014 GXL 3.0 TTD - gone after it failed me bad. Now MY16 GXL TTD 200
Comment
-
Originally posted by dugite57 View PostI've got the 2014 Update D4D. Had a good look under the bonnet and assume I need amts's Mk2 but in order to fit it I need to move the empty relay box and bracket that's on the firewall. Have I got this right?
I just want the fuel pre-filter, so am wondering if there's a solution that does not involve moving the relay box. I'm wondering if the relay box might fit into the compressor area of amts's bracket.
Thanks in advance
Comment
-
Hi Andrew,
I am looking to get a MKII with switch bracket, but I have a question on behalf of a mate at work.
He picked up his new HiLux D4D 2014 yesterday. Do you know if these brackets will fit the new HiLux?
He has ordered an ARB compressor..
Cheers.
Mark.D4D Prado GXL - 2014. 2" OME lift, ARB Deluxe Winch bar, ARB under body protection plates, ARB EZ Deflator, Weaco fridge, Matsen fridge on slide, BFG A/T's, ARB CKMA12 compressor, Oztrail side awning with LED lights PLUS canvas extension, Lightforce XGT's.. Oricom UHF380, GME AE4017
Comment
-
Originally posted by MDSimpson View PostHi Andrew,
I am looking to get a MKII with switch bracket, but I have a question on behalf of a mate at work.
He picked up his new HiLux D4D 2014 yesterday. Do you know if these brackets will fit the new HiLux?
He has ordered an ARB compressor..
Cheers.
Mark.
Comment
-
So if I want convert the ARB TOOL box compressor to under bonnet for late (nov build) 2011 D4D which bracket? Mk2?
Sent from my SM-P605 using Tapatalk_______________________________________
[SIZE=1][B]2011 Silver 150 DVD[/B] [B]GXL[/B][/SIZE][SIZE=1], Safari Snorkel, Sand Grabba mats, Michelle Sacs seat organizer, ARB Bull Bar, Lightforce 170 HID, Bonnet and Headlight protectors, Dual Batteries, Engel Fridge, Kaymar rear spacer, Cooper STTs [B]x 6[/B], Rhino Pioneer tray in black, MaxTrax, Black Widow Drawers with top shelf, divider & cargo barrier, ARB Sports Nitrochargers and springs, ICOM IC 440N CB
[/SIZE]
Comment
-
Originally posted by LostDingo2 View PostSo if I want convert the ARB TOOL box compressor to under bonnet for late (nov build) 2011 D4D which bracket? Mk2?
Sent from my SM-P605 using Tapatalk
Comment
Comment