Announcement
Collapse
No announcement yet.
Search Result
Collapse
17 results in 0.0069 seconds.
Keywords
Members
Tags
-
Can you shift the gear stick without your foot on the brake with the engine off? If not, its probably to release the gear selector lockout. Quite a few...
-
If you fold the 2nd row and 3rd row seats flat, the space is perfect to fit a double sized blow up mattress in. Have even slept in it without a mattress...
Leave a comment:
-
Basically in Normal H if 1 wheel loses traction, all the power goes to that wheel and you go nowhere.
In HL, the centre diff is locked, so 50% of...
Leave a comment:
-
Yep 2" is the max suspension lift you can do on the 90's without diff drop and its recommended to extend the links, the extended links are 30mm longer...
Leave a comment:
-
If you are getting a lift you should get extended sway bar links anyway, you will find body roll is a lot worse with the lift and the extended links makes...
Leave a comment:
-
I had my rotors machined off the car after a caliper didn't release and the brake pad wore a slot in the rotor, and they are fine now. So I don't know...
Leave a comment:
-
There's no point trying to get to the nut through the wheel arch unless you have a body lift. You have to go from underneath the vehicle. You should be...
Leave a comment:
-
No, rated recovery hooks, which is what most people install would replace the pigtail tow hook that is just visible in the bottom left corner of your...
Leave a comment:
-
The rear shock top nut is a pain to get to unless you have a body lift. The easiest way to do it is to get an offset spanner on to the top nut from underneath...
Leave a comment:
-
My understanding is that the tail light blinkers didn't conform to Aus design regulations of visible angle, due to the mounting of the spare tyre. So...
Leave a comment:
-
If you want them to last longer, see where the smaller diameter part of the boot is strapped onto the CV shaft. Stretch it further down the shaft, spreading...
Leave a comment:
-
I was having the same problem with my CV boots splitting approx every 6 months due to the ribs rubbing together. Found a good CV joint specialist who...
Leave a comment:
-
I'm not sure how the standard alloy bar mounts up, but the tow hooks from auto stores will bolt up in place of the existing factory hold down hooks on...
Leave a comment:
-
Those brushes are either stuck in with mud and gunk or pretty worn, they should reach to approx the middle of the shaft when new, you can probably get...
Leave a comment:
Leave a comment: