Thanks Ronny, had the problem today, no indicators, hazards working all fuses fine.
Read your post, hit the hazards a few times, and next thing,...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
33 results in 0.0062 seconds.
Keywords
Members
Tags
-
Thanks Ronny, had the problem today, no indicators, hazards working all fuses fine.
Read your post, hit the hazards a few times, and next thing,...
Leave a comment:
-
ive had similar issues and its been intermittent so fingers are pointing to the battery.
changed remotes battery so looks like main. Ran a scan...
Leave a comment:
-
Yokohama Geo ATs
Have to agree, I'm on my second set after getting 90,000 from the first set. I do a lot of highway driving...
Leave a comment:
-
Thanks amts, just completed a lower control arm replacement and upgraded to King kftr101t springs with a 10mm sensor trick on the rear airbags.
...
Leave a comment:
-
with only a 20-30mm lift would I need spacers. I was thinking of a slight sensor tweak. not looking at over 30mm from a 10mm sensor spacer. i have orignal...
Leave a comment:
-
best to view and drive different models imho. From my biased pov I'd get a Grande which was stock there are plenty still around in good nick and low kays....
Leave a comment:
-
thanks to nika I had the same problem. dropped into jaycar and grabbed a $6.50 bargin pn SY4045. the unit is sealed and working beautifully.
gotta...
Leave a comment:
-
so as a summary amts, ?,;
-TEMS becomes redundant. (are there heavy duty after market compatible with tems?)
-the rear with air bags doesnt...
Leave a comment:
-
Great write up jqvm, I like the caulking nozzel SST dbl Thumbs up
Leave a comment:
-
-
Swapped my front rotors with slotted/drilled jobbies and bendix 4x4 pads.
check out the old hot spot cracked rotor!
...
Leave a comment:
-
-
I recently replaced my splash guards- Purchased some 3mm rubber from Clark rubber. about $35 for 1lm of 600mm wide.
Enough to do both front splash...
Leave a comment:
-
ywork;
\ I used a pair of Long, long nose pliars with a bend on the end.- You work from the wheel arch side.
Heres the trick:
1/ place...
Leave a comment:
Leave a comment: