Announcement
Collapse
No announcement yet.
Search Result
Collapse
20 results in 0.0042 seconds.
Keywords
Members
Tags
-
Stolen diesel run to empty: what to do before starting?
Our 2008 diesel Prado, in beautiful condition, was stolen last night and recovered today, having been run out of fuel.
When we get it back...
-
This is a bit old, but I suspect more and more relevant: I noted what I considered "excessive" oil consumption running Valvoline Super Diesel,...
Leave a comment:
-
Which diff oil for ARB locker?
I need to change rear diff oil in a 2008 Prado with an ARB rear locker. In N Qld and thinking 85W-140, GL-5. ARB used to say avoid LSD additives, but...
-
If you want something more quantitative:
A flooded car battery discharge rate is about 1% per day at room temperature, 0.25% per day at 10...
- 1 like
Leave a comment:
-
Probably worth looking at existing instructions if you haven't already done so. Here's the link for the Safari HF install: https://www.safari4x4.com....
Leave a comment:
-
Despite the lack of specifics, I'll give the pre-cleaner a try. Lots of people like them, and I've been on trips where I knocked noticeable amounts of...
Leave a comment:
-
Certainly correct that most people don't drive in extreme dust, but some on this forum do -- one of my recent experiences was Cape York with lots of traffic,...
Leave a comment:
-
Cyclonic pre cleaner - technical info request
I’m looking for info about cyclonic air pre cleaners for Toyota D4Ds (particular a 120), but this applies across the board.
More specifically:...
-
Thanks Leigh,
I'm not worried about adding too much conditioner, or a slight difference in concentration between the tanks - I just want...
Leave a comment:
-
Adding fuel additive to both tanks?
What's the best way to add fuel additive for long storage so it's distributed in both tanks? Assuming I start with one tank empty and the other less than...
-
Just to finish this (old) thread. Was M6 nut, put on with low torque and blue threadlocker....
Leave a comment:
-
Will do. Looks like standard torque for M8 class 8.8 is ~ 16 ft-lbs. It looks like M8 but I'll check.
Leave a comment:
-
I'm thinking yes, also. Just wondered if this could be confirmed.
Leave a comment:
-
Is this nut missing?
Was looking under the car and wondered if someone missed a nut. The picture is from the under the car, towards the front of the engine, on the passenger...1 Photo
Leave a comment: