Announcement
Collapse
No announcement yet.
Search Result
Collapse
32 results in 0.0041 seconds.
Keywords
Members
Tags
-
Scangauge II (SG2) Injector Feedback Values (1KD-FTV) - FOUND
Hi all, thought I would start this on a new post, but I believe the feedback values (2012 Kakadu) on SG2 are as follows:
TXD:07E021AD...Note: Below is for a 2012 KDJ150 (Diesel) Kakadu and may not work with GRJ150 and later GDJ150 models. There should be enough info below to convert to the 7E02182 PIDs used on these models for the temp sensors. SG2 is a much lower level device that requires a more intimate understanding of how data is used within a computing
- 2 likes
-
Hi Phil
It wasn't going into that sort of detail. It was more orientated at a "refresher" to help me (and maybe others) as because...
- 1 like
Leave a comment:
-
Maybe a dumb question, but it's not just an exhaust leak is it?...
Leave a comment:
-
Main injection timing looks as though it's divided by 2 to give 473, my stored data entry from around the time showed 4.6 deg. So you can divide by 20...
Leave a comment:
-
Thanks Phil, updated to C8, was a typo. In this case I was using a scangauge.
The injection periods were already found as per above earlier...
Leave a comment:
-
Cheers Phil
I've just spent the day having another look for the 1KD (I came in because footy is about to start). I believe I may have found...3 PhotosLast edited by spencerm106; 10-04-2023, 11:34 AM.
Leave a comment:
-
I'd definitely be interested to see what you have for the 1GD. My earlier work was only for 1KD and I did a fair bit of playing around with both A3 and...
Leave a comment:
-
A couple of interesting things out of this. Physical address of main ECU is now 700, and they are using service mode $22 now instead of $21 with 2-byte...
Leave a comment:
-
The holy grail... I went through and logged each and every byte over a few days and recorded results in excel (for $21, so 00 to FF) I then looked for...
Leave a comment:
-
Better late than never, they were Toyo open country A/T, can't remember if they were I, II or III
Leave a comment:
-
Generally TRC is not a problem in sand, the VSC is. In high range you can't turn VSC off without TRC, which is done by holding down the TRC/VSC button...
- 2 likes
Leave a comment:
-
I'm also thinking for the temps the divider should be 257 (0x0101) and not 256 (0x0100). Based on (2^16-1)/(2^8-1)=257. But that's just probably being...
Leave a comment:
Leave a comment: