Hi Bloodbeard, it sounds like your Japanese TX display is the same as the top-spec Grande display here in Australia. The lower-spec models have a less useful display that only includes a clock and a temperature reading.
Announcement
Collapse
No announcement yet.
Installing OBD2 bluetooth scanner on M-OBD Prados
Collapse
This is a sticky topic.
X
X
-
Just a quick question, is it noral for the boost/vacuum in the realtime info to be sitting on -4.5 in/hg vacuum?? even when i have it disconnected it still sits at -4.5 in/hg
i have a 120 kz-te and it should be getting between 7-10 psi boost which is 14 - 20 in/hg.
but on a run foot flat max is 9.4 in/hg and sits about 6-7 in/hg
just wondering if the negitive start is having an effect on my final output.
Comment
-
Screenshot your advanced settings in Torque and post hereSilver '04 KZJ120~Manual~GXL~Dobinson/Kings lift~Custom valved Ironmans~Detroit Locker~Endless Air~X9 Superwinch~Madman EMS1~TJM Dual Battery~Rhino Roof Tray~120W solar panel~Foxwing awning~Bushskinz UVP~Long Ranger water tank~Bushman fridge~Steinbauer P-Box~Beaudesert 2 3/4"~Airtec Snorkel~TJM Sliders~Prico Boost Gauge~BFG-KO2s~TPMS~GME TX3420~Front and Rear Cameras~Ultimate Camper hanging off the back!
Comment
-
Originally posted by Flingera View PostHey guys, i brought the OBD2 adapter suggested on the feed and put in the string into advanced settings and i cannot get it to connect to my ecu. I have a 2005 120 prado 5speed diesel.
Originally posted by amts View Post2. An OBD2 device off ebay (http://www.ebay.com.au/itm/121448673471) Please note that recent purchases from this seller have indicated that the design has changed and the special text string no longer has any effect in getting the dongle to communicate with the ECU - 29/10/2017.
Comment
-
I have just recently bought one that works with my '05 4 speed auto 1kz-te Prado.
Bought off ebay, title description is "KW903 OBDII OBD2 ELM327 Bluetooth Car Code Reader Scanner Diagnostic Tool Useful" from seller called "helloclient".
Successfully communicating with the Torque Pro app, and just starting to play around with gauges, deciding what I want to track! Was there a final verdict on ability to track transmission temp? I'm about to do a 3 month stint towing a 1.8t van around Oz, and that's one I'm keen to keep an eye on, along with coolant temp considering overheating/head issues are one of the main known issues with this engine.
Cheers,
Damien
Comment
-
Toyota Prado Oct 2004 Grande Petrol 4L Australian
Engine GJR120
The issue I had: Leaking airbags rear suspension
After a couple of days, Compressor stopped responding.
Prado was sitting on bump stops
No change, no matter what you do
Tried disconnecting the battery (even for 20 hours but no luck)
Removing the power from air suspension ECU (no luck)
Prado was not responding to the up and down control.
To us, ECU was not recognising the commands at all because you are able to see the blinking light for height control when the system is functional.
Found this forum and bought both OBD2 scanners;
Blue one; ELM327 (Android Only, Bluetooth)
"2017 Vgate V1.5 ELM327 OBD2 OBDII Bluetooth CAN Scanner for TORQUE Android phone"
When using the BLUE one Tried Torq lite and pro version
was able to read the RPMs and other stuff but no codes other than the oxygen sensor
Did try resetting but no luck
And then black one;
"KW903 OBDII OBD2 ELM327 Bluetooth Car Code Reader Scanner Diagnostic Tool Black"
Same as above no codes when scanning
BUT was able to reset the air suspension fault codes. <<==============<=======
### FINALLY I WAS ABLE TO HEAR THE COMPRESSOR #####
Comment
-
Having recently purchased a 03 Prado V6, I wanted to be able to check the sensors, clear fault codes etc.
I have successfully got Techstream working on my 03 Prado (M-OBD protocol). The functionality is limited, however provides basic diagnostics and settings - such as adding or clearing keys, and engine monitoring. All via a Windows laptop.
Comment
-
Not sure what I am doing wrong. Have an early 04VX (1kz)
bought the ELM327 V1.5 adaptor as suggested above, it has the mac address starting 00:00 but I still can’t get it to connect.
Ive tried it with the string and without.. the screen shot below is the best I can get... any ideas?
Comment
Comment