Re: Icom IC-7000 Installation
In the general poor form of replying to ones own post....
I've fixed the RFI problem! Turns out that you need more grounding. Here's the setup
More earth bonding might improve things even further but it all seems sorted at the moment.
Cheers,
Tim
In the general poor form of replying to ones own post....
I've fixed the RFI problem! Turns out that you need more grounding. Here's the setup
- Power cabling runs from the battery down the passenger side cabling channel near the door.
- Coax also runs down the cable channel
- The earth wire from the battery is connected to the body at one of the tie-down points in the rear tray
- Using earth straps from Jaycar (http://www.jaycar.com.au/productView...Max=&SUBCATID=) bond the bull bar to the body, the bonnet to the body and the body to the chassis near the rear fuel tank.
More earth bonding might improve things even further but it all seems sorted at the moment.
Cheers,
Tim
Comment