Put me down for a set please AMTS, what ever the outcome is!
Announcement
Collapse
No announcement yet.
Grande Airbag Retaining after a Lift
Collapse
X
-
Originally posted by Peterpilot View PostI can't get the measurements, the top clip on the airbag is missing and the whole airbag assembly is loose when deflated.2004 V6 Grande. BLACK -
Comment
-
-
That's a great drawing Amts, love it.[FONT=Comic Sans MS][B][COLOR=#000080][COLOR=#FF0000]2003 V6 Parado Grande.[/COLOR][/COLOR]
Custom rear drawer system, Custom 6mm alloy bash plate and Custom rear steel bar, Dual battery and ARB duel compressor. SPC upper control arms. So far....[COLOR=#0000CD]See my build[/COLOR] [URL]http://www.pradopoint.com/showthread.php?31855-Kevdebbi-s-120-V6-Grande[/URL][/B][/FONT]
[SIGPIC][/SIGPIC]
Comment
-
In order to lift my deflated airbag back into position I wedged a couple of 1/2" sockets under it. The total length of these sockets was 54mm and with the airbag pin inside the socket, the airbag wasn't high enough to replace the top retaining plate. I then put the pin at the bottom of the airbag on top of the socket rather than inside it and the airbag was now in position and still with some freeplay.
Based on the fact that with the vehicle on bumpstop with a 54mm object plus the length of the pin under the airbag, there was still some freeplay at the top of the airbag, a 50mm spacer with the airbag pin inside should not be an issue.
"Sure it’s quiet, for a diesel, but that’s like being well-behaved… for a murderer."- Jeremy Clarkson
Comment
-
Originally posted by Peterpilot View Postshould not be an issue.
Excellent job, thanks for clarifying thatMarc, 2003 Grande V6, Just a Bit of Stuff Done..........Work in progress.
[url=http://www.pradopoint.com/showthread.php?21168-1Coolbanana-s-Grande-Build-Up]1Coolbanana's rig build up[/url]
Comment
Comment