Yeah look good. Just make sure they won't upset any mechanical or legal issues! :-)
Announcement
Collapse
No announcement yet.
Do these bfg on king wheels look good?
Collapse
X
-
Well I got them, I thought why not. They are growing on me. There is definitely got a lot more noise compared to the grandtreks especially on the freeway doing 110.
I've been busy today putting some new bits on. Here's how my car stands right now
I badly need a lift and bull bar
I still gotta figure out what the offset is but the tyres don't hit anywhere2008 Prado 120 GXL V6 auto. Stock...but slowly building it up
Comment
-
Measure centre to centre across your tyres and compare that with factory track. Anything less than factory means unfortunately you aren't legal or roadworthy. This is the quickest and easiest check.My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic
Comment
-
Should have mentioned measure front and back of the front tyres and average the numbers to adjust for toe in.My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic
Comment
-
..Last edited by ravenhard; 09-12-2014, 08:10 PM.2008 Prado 120 GXL V6 auto. Stock...but slowly building it up
Comment
-
Track measurement is quick and will tell you exactly what's going on.My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic
Comment
-
Easiest way is to get both spares and lay the outside of the wheel face down on a flat floor. Using a straight piece of material, lay it across the tyre. This will be your datum.
A. Measure from the datum through the centre of the wheel to the floor.
B. Measure from the datum to the hub surface.
Offset = B - A/2
Comment
-
Originally posted by amts View PostEasiest way is to get both spares and lay the outside of the wheel face down on a flat floor. Using a straight piece of material, lay it across the tyre. This will be your datum.
A. Measure from the datum through the centre of the wheel to the floor.
B. Measure from the datum to the hub surface.
Offset = B - A/2Cheers
Micheal.
2008 GXL D4D Auto. GOING... GOING... GONE
2015 GXL 1GD Auto. And it begins again...
Comment
-
Originally posted by amts View Post120 rims are +30. So if you measured 8mm closer, then those King rims are +38. So the track has been reduced and ....
Looking at buying some wheels and tyres in the next month so need to get my figures right before the buy lol.[B]My 2007 D4D [COLOR=darkred]Flinders Red[/COLOR] Buildup[/B] - [URL="http://www.pradopoint.com/showthread.php?13590-Golly-s-Flinders-Red-D4D-GXL"] HERE[/URL] :cool:
[B][COLOR=navy]K[COLOR=red]D[/COLOR][/COLOR][COLOR=darkorange]L[/COLOR] Designs[/B] (Designer for the 2009 GTG Banner) - [URL="http://kdldesigns.net/index.php/banners"] HERE[/URL] ;)
,
Comment
-
1" each side or 1" total? +5 for the first and +17.5 the second.My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic
Comment
Comment