Can you confirm they were made by http://www.canvasseatcovers.com.au/ and they're airbag compatible? I'm considering a set of these for my 120.
The say 'Made in Australia' I don't know by who, yes the are air bag comp. and must be fitted to the correct seat.
OK, excluding fitting issues are you happy with them?
Happy with the look and end result yes but that said I will by a cheap throw over set for the front seats on my Cape York trip. I don't plan to remove them in a hurry to try wash them.
Prado 150 GXL - V6 Auto, ABR-SIDEWINDER Dual battery System, Tekonsha P3, 50mm Lift kit - King Springs & Bilstein Shocks, Polyair Bags, BFG 275/65R17 Tyres, Milford Cargo Barrier, ERPS Extreme use 10 coupler rust protection, Rhino Rack, Factory Towbar, ABR-SIDEWINDER fridge/freezer, ABR-SIDEWINDER compressor and PSV deflators, Twin Drawer system, Fridge Slide, Twin 23L water tanks, 80W Solar Panel, Hot Water Shower, ARB Awning, Toyota Seat Covers, ARB Winch Bar, Warn XD9000, HID's, Snorkel .
My website: [url]http://www.sidewinder.com.au/[/url]
The "wet seat" covers at the TJM stand at the show looked the goods and you can get them without the TJM logo which is even better.
They were multi fit front seat with custom prado headrests and custom rear seat for all of the splits etc, they looked really good.
[b]Rob[/b]
[b]2016 Toyota Hilux SR5 D4D Auto Company Cruiser... [/b].
[url=http://www.pradopoint.com/showthread.php?23866-Hutch-s-2012-150-GXL-V6-petrol-Auto]Hutch's 2012 Build up[/url]
[SIGPIC][/SIGPIC]
I saw the Wet suit ones at the motor show the other week, they looked good. Nothing like the toyota ones as one is wet suit material and one is cloth.
[b]Rob[/b]
[b]2016 Toyota Hilux SR5 D4D Auto Company Cruiser... [/b].
[url=http://www.pradopoint.com/showthread.php?23866-Hutch-s-2012-150-GXL-V6-petrol-Auto]Hutch's 2012 Build up[/url]
[SIGPIC][/SIGPIC]
I have a set of SeatGlovers (Neoprene) seat covers on the JK Wrangler I am about to swap for a GXL Prado. Aside from being a little sweaty in summer and anytime after a long drive, they were great. Effectively waterproof and certainly easily cleaned of all the dog paw prints that my hound seems to like putting on them.
The Toyota ones are just cloth (confirmed through my dealer) and I will not be investing in a set at this stage. I think I will wait to see what aftermarket options become available.
Cheers!
2010 Prado GX 3.0L TD - "Paul" - TJM XGS 40mm Lift Kit, Firestone Coilrite Airbags, 5000kg Rated Front Recovery Points, Sure Power Battery Isolator and Dual Battery Setup, Airtec Snorkel, HID High Beam Headlights.
2008 Jayco Dove Outback - "Davo"
For southern Sydney, try Aussie Sheep and Wool on Bestic Street, Rockdale and Golden Ram on the Princes Highway at St Peters. Have not visited them yet, however, made a couple of phone calls. Both quoted various prices: full skins, centre skins, skins with side supports, etc, and suggested some were air bag compatible for the seat airbags. Both have web sites. Will visit in the near future.
I just fitted a set of RM Williams seude covers, airbag compatible. About $70 for the front set, and an excellent colour match for the interior (GXL).
I had these on my last Prado as well, they wear and fit well.
Regards
Craig
Hi Craig,
Do you have a part number of what you fitted ???
Cheers,
Ken and Kristine
150 GXL D4D Auto Glacier White
Toyota Tow Bar, Anderson Plug, Prodigy P1, Window Tint, Headlight & Bonnet Protectors, Icom UHF, Engel 40lt, Gravel Rush GR150 mudflaps
Crusader Mk2 18ft 6in Full Van
Full product number for those interested is CG484.16.30A
At $70 a pair, a real bargain.
Cheers,
Ken and Kristine
150 GXL D4D Auto Glacier White
Toyota Tow Bar, Anderson Plug, Prodigy P1, Window Tint, Headlight & Bonnet Protectors, Icom UHF, Engel 40lt, Gravel Rush GR150 mudflaps
Crusader Mk2 18ft 6in Full Van
I have ordered Wetseats for the front and millde row. Total cost is $519 inc delivery. The front ones are $179 back $320 Del $20.
When they come and are fitted I will post some pix.
Regards
Crisp Image
GX 150 with 3rd row seats, Milford Cargo Barrier, factory roof racks,Tekoncha P3 & a duel battery system..
I have ordered Wetseats for the front and millde row. Total cost is $519 inc delivery. The front ones are $179 back $320 Del $20.
When they come and are fitted I will post some pix.
Regards
Crisp Image
I am going to order a set of these later in the week. The price is reasonable and the feel of them is good. I have seen some in the flesh at TJM but not buying them from them because their logo is plastered on them.
They are making them to fit the Prado 150 series. The middle seat ones are more expensive as they apparently have 32 individual pieces sewn into the product.
Comment