You could use a Lightforce (Custom switches) they do a dual switch. this could be wired to be a 3 position switch easily. Not sure if they do a SPDT you'd have to check.
The Lightforce ones are SPDT but the NC side isn't connected on the board to the connector. Easy enough to mod if you have the skilz..
The switch is actually DPDT but one side is to control the LED illumination.
Silver '04 KZJ120~Manual~GXL~Dobinson/Kings lift~Custom valved Ironmans~Detroit Locker~Endless Air~X9 Superwinch~Madman EMS1~TJM Dual Battery~Rhino Roof Tray~120W solar panel~Foxwing awning~Bushskinz UVP~Long Ranger water tank~Bushman fridge~Steinbauer P-Box~Beaudesert 2 3/4"~Airtec Snorkel~TJM Sliders~Prico Boost Gauge~BFG-KO2s~TPMS~GME TX3420~Front and Rear Cameras~Ultimate Camper hanging off the back!
Comment