Runva winches

[Ghost Advanced Member Find all posts View Profile Close Ghost]

You should still be able to get then from Toyota??

[Guest Close Guest]

The new winch cradle part number is: PZQ29602WC $210.30 including GST.

Make sure you quote them the part number or they will look up the winch cradle manually and tell you that it is no longer available for a slightly different part number.

[Waipuna Lurker Find all posts View Profile Close Waipuna]

Thanks guys,
I will head to Toyota today armed with the part# and see what happens.

[djnapkin Junior Member Find all posts View Profile Close djnapkin]

Amts is spot on. FYI when I installed the cradle and winch I borrowed an engine crane to hold the bull bar when I unbolted it. There was enough extra length in the wiring so I didn't have to cut any wiring to pull the bar off a couple of inches to install the cradle. Did it mostly myself but need the help of a mate getting the bolts in while I bench pressed the cradle and winch. The toyo instructions that come with the cradle explain it all clearly. You will need an offset hawse. The winch comes with a straight one.

Sent from my GT-P5110 using Tapatalk

[craigm Addicted PP Member Find all posts View Profile Close craigm]

11XP Runva now on my wish list to replace my Magnum which is pretty tired. Just gotta check to see if I can still fit my front cam in the Control box

[talk2tiny Moderated member Find all posts View Profile Close talk2tiny]

11XP Runva now on my wish list to replace my Magnum which is pretty tired. Just gotta check to see if I can still fit my front cam in the Control box

You're welcome to come and have a look at mine if it'll help


Sent from my iPad using Tapatalk

[craigm Addicted PP Member Find all posts View Profile Close craigm]

That's be good thanks Tiny. I'll PM you

[Peter.Rocks Junior Member Find all posts View Profile Close Peter.Rocks]

i got one of the winch plates late last year it was about $240, its a pain in the ass to put on and if its a aftermarket winch you need to grind the bullbar back a little or the guide at the front wont fit in, and you need to drill new holes to bolt the guide in, i couldnt align the bullbar back up 100% its dropped a little, but im not worried about it

[Razorback81 Advanced Member Find all posts View Profile Close Razorback81]

is there a limit to the size of winch you can fit in the front of a 120 with an ARB winch bar?
i see a lot of you have 9500lb
these ones talked about are 11000lb
and Runva do a 12000lb for like $699

is bigger better? or slower?
a fully loaded Prado weighs in at 6400lb

[slimf Senior Member Find all posts View Profile Close slimf]

I would also like to know about the 12000 on a 150 with arb bar... They are all cheap in my book, so I wouldn't mind spending more on bigger winch if it's of benefit. Compared to a warn, they are all cheap

[pete8205 Member Find all posts View Profile Close pete8205]

Fitting the winch in the factory bar with the winch cradle I fitted a tigerz11 no issues I managed to souce an offset fair lead through ebay.

[fido666 Banned Find all posts View Profile Close fido666]

Fitting the winch in the factory bar with the winch cradle I fitted a tigerz11 no issues I managed to souce an offset fair lead through ebay.

If you ask Tigerz11 when you place your order they will supply an offset hawse instead of the standard one.

[pete8205 Member Find all posts View Profile Close pete8205]

I wish I knew that it would have saved a couple of bucks