AMTS 120/150 Prado & FJ bash plates. SA made/supplied.

[Gunnell]

Hi Andrew,

Im feeling naked!!!,

Any idea on time frame?..my bars have arrived, just awaiting a fitting date but expect to do the drive to Geelong perhaps next week...

[MidLifeCrisis]

amts

I was under my rig and noticed the middle exhaust and rear exhaust on my 3inch stainless steal Mantra system are close to destroyed! The guy looking with me suggested I should have put some of that (your) "kick 4r$e plate there too!

Reality is should have.....

[mackayvx]

Gday amts,

Top work on these plates...
I have dropped you an email with all of my info - Im very keen for a set!!

Cheers Drew

Here is a pic of the plate meeting the ARB Plate at mentioned radiator cross member on the 120

Regards Adam

Thanks for that photo Adam.

Amts. Interested in transfer guard. Have 1kz120, 2004 grande. Also noted you have a diff drop. Do you supply this kit also or is by someone else.
Cheers
Castoy

Hi Castoy,
Will do, currently waiting on the trasnfer guard prototype.
Yes, I supply the diff drop kit too @ $40 a set. The set contains the 2x diff spacers, 2x longer diff HT bolts, 2x nylock nut, 4x HT flat washers. Note that spacers for the bashplates are not included for diff drops if you have aftermarket bashplates. My bashplates have been designed to suit a 1" diff drop without needing other spacers.

[CASTOY]

Amts. Interested in transfer guard. Have 1kz120, 2004 grande. Also noted you have a diff drop. Do you supply this kit also or is by someone else.
Cheers
Castoy

[ondaboat]

Here is a pic of the plate meeting the ARB Plate at mentioned radiator cross member on the 120

Regards Adam

On the 120, they meet at the radiator crossmember.
On the 150, the bashplates has the same 2 holes as the OEM where the ARB plates bolt onto.

I've been trying to get in touch with the fabricator but he hasn't return my calls. I've been stuck at home all week trying to get over a cold I caught in Sydney. Otherwise they would have got a visit.

[LiveFreeAndRoam]

1. Yes they will fit with ARB bars. It meets up with the shrouds on both the 120 & 150.

I haven't seen one in real life yet (I hope to soon ), though when you say "meets up" I presume your plates fit under the shrouds of the ARB bar? When I look at the OEM plates, they fit under the ARB shroud.

LFaR.

[MidLifeCrisis]

Amts.

My rig is still ready for the proto type, just say the word.

1. Yes they will fit with ARB bars. It meets up with the shrouds on both the 120 & 150.
2. Yes they are compatible with transfer case guards by Brains.

[gumboot]

Andrew,
Top work.
1. Will these fit up with the ARB deluxe bar ok,. IE the ARB Deluxe bars have a radiator shroud underneath. I presume the back of the shroud is where this starts?
2. Will your underbody protection plates fit up with the transfer case protectors being made here
http://www.pradopoint.com/showthread...rd-%28TG120%29

cheers

Andrew, were the transfer case plates being done with this batch of plates?

Paul

Just the prototype only at this stage.

Thanks for the update Andrew.

Ok, I will wait a little longer . I'll try to keep my belly off the ground on my upcoming trip and look forward to using them on a subsequent adventure.

Cheers,
LFaR.

Sorry for the delay. Major project got in the way of my order, unfortunately.

[LiveFreeAndRoam]

Thanks for the update Andrew.

Ok, I will wait a little longer . I'll try to keep my belly off the ground on my upcoming trip and look forward to using them on a subsequent adventure.

Cheers,
LFaR.

[prh]

Andrew, were the transfer case plates being done with this batch of plates?

Paul

Just forgot it on a recent trip huh? Shite happens

Left it up there when I installed the Sovereign bullbar with 1CB.

On another note, the fabricator has advised that the ETA for the bashplates is next week (no actual day promised yet). I'm up in Sydney Friday 13th (!) to 16th. Would have liked to bring the Sydney orders up with me on the flight but I don't think the security guards will buy it if I wear the bashplates and claim that it's my chastity belt.