Announcement
Collapse
No announcement yet.
Search Result
Collapse
255 results in 0.0365 seconds.
Keywords
Members
Tags
-
sorry for never replying. if anyone's following, the remote head is screwed to the upper panel and the body is mounted to the passenger side upper kick...
-
I always run 40psi in the highway and around 45 in the rear if towing. Also, economy is much better cruising at around 2000rpm, which is 80kph for me...
Leave a comment:
-
Thanks! I wonder what's different about the AU cersiom pigtail.
Leave a comment:
-
Thanks for that. I see "12303" on the connector in the same position so I guess its 90980-12303
Not sure how you work out which...
Leave a comment:
-
D4D VNT Acutator Connector
Does anyone have the part number for the connector and pins that go to the VNT Actuator on the engine?
-
What do you think changed with the setup between when you modified the relief valve years ago to now when the it started having issues? Good info on the...
Leave a comment:
-
Great write up! will definitely be doing this when its clutch time
Leave a comment:
-
Good to know! Thanks for posting back the solution. Wonder why the Injection Pump wore out...
Leave a comment:
-
Very Nice!. I have a similar setup in the rear as I never liked the height of the fridge on double drawers or the complexity/cost of a drop down slid...
Leave a comment:
-
around 100kpa with the engine not running but ignition on reds. as you drive you should see it register boost till about 10psi (170kPa abs) at full t...
Leave a comment:
-
Replace the Map Filter and chuck a scan tool on and see the MAP sensor is reading properly.
Leave a comment:
-
I've run GME for years, had Unidens as well but Ive always found Unidens to not be as clear on TX and RX compared with the GMEs
- 1 like
Leave a comment:
-
Ah damn, let me know what you're after for the locker - I'd be interested in the front one...
Leave a comment:
Leave a comment: