Announcement
Collapse
No announcement yet.
Search Result
Collapse
414 results in 0.1714 seconds.
Keywords
Members
Tags
-
This is how I did our 120. down outside the door seal and then drill a hole in underside of the tail light. That lets the cable into the inner guard...1 Photo
-
The same thing happened to our 2004 V6 where it ran out of fuel back in 2017 just outside Port headland with just under half of second tank left. Funny...
Leave a comment:
-
Found part of the tooling I made to repair the track. bits still MIA are a piece of steel bent to fit snuggly around the outside of the track , it was...
Leave a comment:
-
I fixed it without having to replace any parts. BUT that was 15 years ago . Still have the Prado but just searched my tool boxes and the tool I made...
Leave a comment:
-
The actual bar is not capable of holding a winch. it only supports a fairlead. The winch is mounted behind the bar on a separate frame that is bolted...
Leave a comment:
-
Thanks Phil.
Hopefully this problem has been fixed for him. As he has minimal knowledge of mechanical he really was at the whim of the previous...Last edited by sparksy; 25-05-2023, 11:07 AM.
- 1 like
Leave a comment:
-
Have you tried doing a search on those combos. Look for posts by Whitey . Lots of info in the suspension section.
Leave a comment:
-
Although Ive got 60L fridge, slide drawer ( full of stuff that I may need) and batteries and another fridge in 2nd row. I avoided the constant 400kg...
Leave a comment:
-
Have to agree with 404pug. I had fitted a OME 2" lift suspension kit about 2 years ago to our 2004 prado. Mainly to reduce the drop in rear when...
Leave a comment:
Leave a comment: