Announcement
Collapse
No announcement yet.
Search Result
Collapse
23 results in 0.0082 seconds.
Keywords
Members
Tags
-
I first done this mod back in 2011 with 1 KD almost covering 100,000km+ without an inch of trouble, oil stays clean and no more soot. This mode works...
-
Gday,
At the start of this thread I didnt think the egr was there to relieve the excess pressure as mention by Skywalkerrun, but after some...
Leave a comment:
-
D4D Water Pump Leak
Hi All,
I just noticed that Water Pump on my car has some collant stains on the bottom of it. It is not really leaking as i havent noticed...
-
It will certainly help but not significantly. Crankcase is always venting, and there will be an oil mist present at all times. The only difference with...Last edited by xpro; 22-04-2013, 08:01 AM.
Leave a comment:
-
According to my research, EGR valve does increase EGT`s ( Exhaust temps and combustion temps) by re-routing some of 30% of the exhaust gas.
But...
Leave a comment:
-
Intresting read about EGR system , and about different tests conducted in diesel engines.
http://www.ias.ac.in/sadhana/Pdf2004Jun/Pe113...
Leave a comment:
-
Im sorry to hear its not working out for you. My cruiser is still going strong and a good few miles was put on.
Did you blank the egr at manifold...
Leave a comment:
-
Thanks
No difference from stock, maybe on part throttle turbo seems to be more responsive due to more pressure in the exhaust, but i may well be...
Leave a comment:
-
Hi all,
Some more testing done, and slight change of design this time.
The custom made pipe coming from the Egr exchanger that...Last edited by xpro; 19-03-2012, 09:28 AM.
Leave a comment:
-
Hi,
When you ask how does the hose cope with exhaust gases, the answer is it doesnt. The exhaust port is blocked off, hence the additional...
Leave a comment:
-
Hi,
I have a late 05 model. And yes there is 2 vacuum hoses attached to the EGR and also an electric position motor on top.
@skywalkerrun...Last edited by xpro; 29-01-2012, 07:04 AM.
Leave a comment:
-
Hi Federick,
The Denso injectors were costing me 320€ euros each which is around 400$, and the pipes were around 70$ each, plus a few...
Leave a comment:
-
Hi,
was this tested on cold or hot engine? your readings are well with in the limits anyways, providing they were tested on cold engine.
...Last edited by xpro; 28-01-2012, 06:57 AM.
Leave a comment:
-
Hi All,
I also had my injectors replaced, 05` UK spec 1kd landcruiser.
Initially my car was very noise on cold starts and eventually...Last edited by xpro; 28-01-2012, 06:57 AM.
Leave a comment:
-
Haha, welding job wasnt that good, sort of a rush job, i even had to used mild steel wire on stainless cause i had none left, but i gave it a coat of...Last edited by xpro; 28-01-2012, 06:31 AM.
Leave a comment:
Leave a comment: