Announcement
Collapse
No announcement yet.
Search Result
Collapse
119 results in 0.0134 seconds.
Keywords
Members
Tags
-
Reignited old thread. I’m about to install a tow pro elite and noticed that according to the instructions the brake signal wire should go down towards...
-
Jeremy,
Questions on your strut spacers - What's the reason for spacing out the bump stop? Is it to a avoid the shock reaching max compression...
Leave a comment:
-
Yes, with the spacing I thought it was actually more then that when I did some tests, but either way it does seem to articulate and hang down well in...
Leave a comment:
-
Mark/ATMS
These are my part numbers. Zordo spaced down my rear shocks 15mm but I don't think that would effect the height?
...
Leave a comment:
-
Thanks Mark,
I have about 852mm in the rear, so it's sitting at about 852mm rear/803 front. I have the 327 springs in the back for when...
Leave a comment:
-
Bilstien/Dobinson front ride height
I am chasing some advice on the front height of my suspension. I have Billy's/dobinson combo and have been very happy with them, but over the 12 months...
-
I'm just getting my head around the several different options of rhino racks that suit the prados.. With a 50mm+ lift a want to keep overall height down...
Leave a comment:
-
Western filters has a you tube clip. It's towards the front of the motor on the drivers side.
https://m.youtube.com/watch?v=5U1i0dS_nO8
Leave a comment:
-
New Rock Armour side steps/sliders now fitted. Quite impressed with the quality, really like that they sit up high, I've actually achieved an additional...
Leave a comment:
-
Finally finished all 5 breathers tonight!
I don't know how anyone can physically get their hand onto the 3 breathers on the bell housing,...
Leave a comment:
-
I agree, John does provide good service.
Out of curiosity, what was wrong with your ESC after fitment?
Leave a comment:
-
-
There is no way I would attempt a water crossing where I knew the water level was going to be grill height or higher without a snorkel. Agree they are...
Leave a comment:
Leave a comment: